Abstract:In this paper, we analyze the impact of characteristic impedance variations among standards on the accuracy of the thru-reflect-line (TRL) calibration technique. The impedance transformer method is adopted to derive the expressions of the calibration coefficient errors due to the manufacturing tolerances. It is found that three factors can affect the magnitude of the errors in the calibration coefficients (c/a and b terms), which are crucial to get the final calibrated results. The first factor is related to the original parameters of the error networks (test fixtures): the larger the insertion losses, the smaller the error in b; the error in c/a may see an opposite trend if the error network is lossy instead of lossless. The second factor is denoted as the phase contribution (one of the three multipliers of the derived error expression): the magnitude of this error contributing item is approximately equal to the ratio of two hyperbolic sine functions, the variables of which are the length of Line and the length difference between Line and Thru, respectively. The third factor comes from the impedance differences between Thru and Line: the smaller the impedance variation, the smaller the error. The error analysis, presented here, can help engineers evaluate the calibration accuracy by analyzing the error contributing items. It also can be further used to guide test fixture designs to maximize TRL's error immunity to the transmission line characteristic impedance variations.

Monte Carlo Analysis of Measurement Uncertainties for On-Wafer Multiline TRL Calibration Including Dynamic Accuracy

Propagation of Linear Uncertainties through Multiline Thru-Reflect-Line Calibration

Uncertainty Evaluation and Optimization of INS Installation Measurement Using Monte Carlo Method

Calibrate the Non-Orthogonal Error of AFM with Two-Dimensional Self-Traceable Grating.

MMIC on-Wafer Test Method Based on Hybrid Balanced and Unbalanced RF Pad Structures

Sensitivity and Uncertainty Analysis of Nonideal Calibration Standards for 16-Term Error Model

Thru-Reflect-Line Calibration Technique: Error Analysis for Characteristic Impedance Variations in the Line Standards

Registration Error Analysis and Evaluation in Large-Volume Metrology System

Calibration for the Errors Resulted from Aberration in Long Focal Length Measurement

Geometric Analysis of Measurement Errors in a Surface Metrology Class with Closed-Loop Probes

A Unified Approach for Reformulations of LRM/LRMM/LRRM Calibration Algorithms Based on the T-Matrix Representation

Calibrations for Millimeter-Wave Silicon Transistor Characterization

A New SOLT Calibration Method for Leaky On-Wafer Measurements Using a 10-Term Error Model

Validation of the Reference Impedance in Multiline Calibration with Stepped Impedance Standards

A potentially significant on-wafer high-frequency measurement calibration error

A study on mutative scale straightness measurement based on uncertainty analysis

Material Measurements Using VNA-Based Material Characterization Kits Subject to Thru-Reflect-Line Calibration

A Novel Four-Port Symmetric Probe Calibration Method for On-Wafer S-Parameter Measurement

A Method to Determine LRRM Calibration Standards in Measurement Configurations Affected by Leakage