Abstract:Vibration shaker testing is a great tool of validating the vibration fatigue performance of automotive components & systems. However, the representative vibration schedule requires a pre-knowledge of the acceleration history for the test object, which usually is not available until the later development phase of a vehicle program when physical properties are available. Sometimes, a generic vibration schedule developed from the worst-case loading profiles are used with risk of lacking correlation with later full vehicle durability test such as Road Test Simulator (RTS) or Proving Ground (PG) road test due to the higher loading amplitude. This paper proposes a virtual accelerometer approach to collect acceleration responses of a component from a virtual vehicle model. First, a multiple body dynamic model will be produced for virtual load calculation over a series of digitalized virtual proving ground road profiles. These loads will be then applied on the virtual vehicle CAE model with all representative components & subsystems. Acceleration response for the system of interest is then extracted from modal transient dynamic analysis. Later, the acceleration history is converted to frequency domain, and the associated spectral damage calculation is conducted. The final vibration profile is developed based on the equivalent damage concept. The virtual acceleration acquisition and physical acceleration acquisition show good agreement in both time domain and frequency domain. The profile generated from virtual acceleration acquisition covers very well for the physical acceleration acquisition. Overall, virtual acceleration-based profile ensures the conservative shake test results for the example studied. Compared to the physical accelerometer, the virtual accelerometer can provide acceleration data economically and quickly in the early phase of the product development. The proposed approach will ensure the component shaker test is conducted using the meaningful and representative vibration load.

Laser Doppler vibrometer and accelerometer for vibrational analysis of the automotive components during Simulink simulation for validation

A Non-Contact Dynamic Attitude Measurement System Based on 3D Oblique Laser Doppler Vibrometers

Virtual Accelerometer Approach to Create Vibration Profile for Automotive Component Shake Test

Noncontact Intelligent Vibrometer Based on Laser Triangulation

Application of Laser Doppler Vibrometer in Otology

Helicopter main rotor angular velocity analysis by laser Doppler velocimetry: simulation and experimental results

Research Progress of Laser Doppler Vibrometry Technology and Its Application

Novel Applications of Laser Doppler Vibration Measurements to Medical Imaging

Pitch independent vehicle-based laser Doppler velocimeter

Design and validation of dynamic characteristics of vibration of test fixture for automobile application

Fiber-Based Laser Doppler Vibrometer for Middle Ear Diagnostics

Multi-point laser coherent detection system and its application on vibration measurement

Experimental Investigation Using Laser Vibrometer and Finite Element Modeling for Modal Analysis of Camshaft

LDV-induced Stroboscopic Digital Image Correlation for High Spatial Resolution Vibration Measurement

Design and Implementation of Vibration Isolation System for Mobile Doppler Wind Lidar

Fourier spectral element for simulation of vibro-acoustic modulation caused by contact nonlinearity in the beam

Model based Verification and Validation of LiDAR sensor

Using a Retro-Reflective Membrane and Laser Doppler Vibrometer for Real-Time Remote Acoustic Sensing and Control

Acoustic Standing Wave Field Measurement Using a Laser Doppler Vibrometer Based on the Hankel Fourier Algorithm

Accelerated Real-Life (ARL) Testing and Characterization of Automotive LiDAR Sensors to facilitate the Development and Validation of Enhanced Sensor Models

Application of a multi-beam vibrometer on industrial components