Abstract:Developing a miniatured laser vibrometer becomes important for many engineering areas, such as experimental and operational modal analyses, model validation, and structural health monitoring. Due to its compact size and light weight, a miniatured laser vibrometer can be attached to various mobilized platforms, such as an unmanned aerial vehicle and a robotic arm whose payloads can usually not be large, to achieve a flexible vibration measurement capability. However, integrating optics into a miniaturized laser vibrometer presents several challenges. These include signal interference from ghost reflectance signals generated by the sub-components of integrated photonics, polarization effects caused by waveguide structures, wavelength drifting due to the semiconductor laser, and the poorer noise characteristics of an integrated laser chip compared to a non-integrated circuit. This work proposes a novel chip-based high-precision laser vibrometer by incorporating two or more sets of quadrature demodulation networks into its design. An additional set of quadrature demodulation networks with a distinct reference arm delay line length can be used to conduct real-time compensation to mitigate linear interference caused by temperature and environmental variations. A series of vibration measurements with frequencies ranging from 0.1 Hz to 1 MHz were conducted using the proposed laser vibrometer to show its repeatability and accuracy in vibration and ultrasonic vibration measurements, and its robustness to test surface conditions. The proposed laser vibrometer has the advantage of directly measuring the displacement response of a vibrating structure rather than integrating its velocity response to yield the measured displacement with a conventional laser Doppler vibrometer.

Application of a multi-beam vibrometer on industrial components

A Non-Contact Dynamic Attitude Measurement System Based on 3D Oblique Laser Doppler Vibrometers

Vibration Compensating Beam Scanning Interferometer for Surface Measurement

Torsional vibration measurements on rotating shaft system using laser doppler vibrometer

Multi-point laser coherent detection system and its application on vibration measurement

NON-CONTACT MEASUREMENT TECHNIQUE FOR DYNAMIC RADIAL DEFORMATION OF EXPLOSION CONTAINMENT VESSELS

Noncontact Intelligent Vibrometer Based on Laser Triangulation

Multi-beam heterodyne laser Doppler vibrometer based on a line-scan CMOS digital camera

Position sensitive detector based non-contact vibration measurement with laser triangulation method utilizing Gabor Transform for noise reduction

Torsional Vibration Analysis Using Rotational Laser Vibrometers

A new type of portable 2D laser vibrometer

LDV-induced Stroboscopic Digital Image Correlation for High Spatial Resolution Vibration Measurement

Design of a high-precision and non-contact dynamic angular displacement measurement with dual-Laser Doppler Vibrometers

Development and Validation of a New Type of Displacement-Based Miniatured Laser Vibrometers

Non-contact measurement method of beam vibration with laser stripe tracking based on tilt photography

Full-Field Measurement of Lightweight Nonlinear Structures Using Three-Dimensional Scanning Laser Doppler Vibrometry

Remote vibrometry recognition of nonlinear eigen-states for object coverage of randomly large size

Applications of Laser Vibrometer in Vibration Measurement of Microstructures

Measurement of the full wave field on a shell using a single-point laser Doppler vibrometer

A Novel Image-Based Long-Range Continuously Scanning Laser Doppler Vibrometer for Operational Modal Analysis of a Rotating Structure

Laser dot projection videogrammetry for vibration measurement and control of a piezoelectric flexible cantilever plate