Abstract:In order to improve the efficiency and accuracy of operational modal analysis (OMA) and model updating with structures in thermal environments, an optimized continuously scanning laser Doppler vibrometer (CSLDV) with a two-dimension scan (2D-S) scheme (CSLDV 2D-S) system was first utilized to estimate modal parameters for complete operating deflection shapes (ODSs). The experiment was carried out on a free-hanging plate made of aluminum. Before this work, the manual-moving laser Doppler vibrometer as a non-contact measurement method replaced heat resistant accelerometers and was used in thermal vibrational measurements to extract only a few dozens of measured points across the grid. The CSLDV is capable of efficient and spatially dense vibration measurements by sweeping its laser spot along a scan path on the surface of a structure. Compared with a manual-moving laser Doppler vibrometer in thermal vibrational measurements, an optimized CSLDV 2D-S system is able to measure thousands of vibration points in a few seconds and reconstitute precise multi-ODSs through the demodulation method and arranging each single ODS according to the position of scan paths on the measured structure. Hence, the complete ODSs can be meshed after interpolation, instead of rough mode shapes formed by the LDV. In terms of model updating considering thermal environments (MUCTE), the target responses composed of measured natural frequencies and selected complete ODSs, which are more physical and correspond to the FE model nodes one by one, replace the past practice, whose ODSs are inaccurate and extracted by frequency response function and commercial software. Even simplifying the cumbersome process of reconstructing a model from response data, the selected complete ODSs are capable of improving model accuracy by a factor of twenty. The model updating based on sensitivity analysis is implemented with the parameter choice of Young's and shear moduli. After MUCTE, the difference between updated and measured natural frequencies is reduced three times as much as those with the past method. The updated target parameters accord with the physical properties of the material in thermal environments and the updated FE model is capable of predicting the first twelve modes of the structure in a uniform 300 °C field.

A Novel Image-Based Long-Range Continuously Scanning Laser Doppler Vibrometer for Operational Modal Analysis of a Rotating Structure

An Improved Multiple Discrete Time System for Operational Modal Analysis of a Slanted Rotational Blade under Natural Excitation Via a Long-range Tracking Continuously Scanning Laser Doppler Vibrometer System

A Non-Contact Dynamic Attitude Measurement System Based on 3D Oblique Laser Doppler Vibrometers

Torsional vibration measurements on rotating shaft system using laser doppler vibrometer

Fast modal rotation measurement using a dual sinusoidal-scan continuously scanning laser Doppler vibrometer

Operational Modal Analysis of a Rotating Structure Subject to Random Excitation Using a Tracking Continuously Scanning Laser Doppler Vibrometer via an Improved Demodulation Method

Variational Bayesian Modal Composition Beamforming for Fast-Rotating Axial-Fan Blade-Noise Localization and Its Application Condition

Full-Field Measurement of Lightweight Nonlinear Structures Using Three-Dimensional Scanning Laser Doppler Vibrometry

Operational Deflection Shape Measurements on Bladed Disks with Continuous Scanning Laser Doppler Vibrometry

A novel algorithm for determining the pose of a scanning laser Doppler vibrometer

Complete Operating Deflection Shapes of an Excited Workpiece in Thermal Environments Via an Improved Continuously Scanning Laser Doppler Vibrometer with a Two-Dimension Scan Scheme

Operational modal analysis using lifted continuously scanning laser Doppler vibrometer measurements and its application to baseline-free structural damage identification

Complete operating deflection shapes and model updating for an excited structure in thermal environments via an optimized continuously scanning laser Doppler vibrometer with a two-dimension scan scheme

Novel Rotor Effective Wind Speed Estimation Method for Light Detection and Ranging Application

Torsional Vibration Analysis Using Rotational Laser Vibrometers

LDV-induced Stroboscopic Digital Image Correlation for High Spatial Resolution Vibration Measurement

Test Verification for Improved Design of Rotor Blade by ESPI

A Novel Demodulation Method for Rotating Machinery Based on Time-Frequency Analysis and Principal Component Analysis

Automatic High-Resolution Operational Modal Identification of Thin-Walled Structures Supported by High-Frequency Optical Dynamic Measurements

Mode Filtering of Continuous Scanning Laser Doppler Vibration Data

Real-time Three-Dimensional Vibration Monitoring of Rotating Shafts Using Constant-Density Sinusoidal Fringe Pattern As Tri-Axial Sensor