Abstract:The fabrication of lead zirconate titanate (PZT) ceramics using VPP technology presents a significant challenge due to the suboptimal curing performance and printability of PZT ceramic slurry. In this study, we successfully manufactured PZT ceramics utilizing vat photopolymerization (VPP) technology by incorporating polystyrene (PS) powders of varying particle sizes into the PZT ceramic slurries. Our investigation revealed that the incorporation of PS powders dramatically enhances the curing performance of the PZT slurry. Furthermore, it was found that the electrical properties of resultant ceramics are intrinsically linked to the morphology and dimensions of the induced pores. However, our research findings indicate that an excessive particle size of PS can negatively impact the dielectric and piezoelectric properties of the PZT ceramics, underscoring the need for careful control over PS powder size during fabrication. The pronounced discrepancy in particle size between PZT and PS powders may lead to suboptimal interlayer combination within specific regions of the green body. Consequently, this could render the PZT ceramics susceptible to additional defect formation. Nonetheless, the fabricated PZT piezoelectric ceramics with a PS particle size of 3 μm demonstrate exceptional electrical characteristics. This research proposes a straightforward and productive approach for broadening the spectrum of processable ceramics within the domain of VPP technology, while offering a comprehensive understanding of the influence exerted by the morphology and dimension of pores on dielectric and piezoelectric properties of ceramic materials.

Interactions between lead-zirconate titanate, polyacrylic acid, and polyvinyl butyral in ethanol and their influence on electrophoretic deposition behavior

Deposition of Y2O3 stabilized ZrO2 thin films from Zr(DPM)4 and Y(DPM)3 by aerosol-assisted MOCVD

Electrophoretic Deposition of Pb(Zr,Ti)O3 Powders on Silicon Wafer and Sintering Densification Approach

Fabrication and Characterization of Micropatterned Barium Titanate Ceramics

Electrophoretic Deposition of Pb(Zr, Ti)O-3 Powder on Si Wafer: Morphological Change Across Film Thickness

The effect of dispersing agents on the electrophoretic deposition, morphology and adhesion strength of multicomponent TiN/PTFE/PEEK coatings

Effect of Poly(Vinyl Acetate) on Structures and Properties of Pbzr0.52ti0.48o3 Thick Films

Electrohydrodynamic Deposition of Nanostructured Lead Zirconate Titanate.

PREPARATION OF PZT THICK FILMS BY ELECTROPHORETIC DEPOSITION AND ITS PROPERTY

Stabilizing Nano Zirconia Suspensions Using Polyacrylic Acid: Adsorption, Rheology and Interparticle Forces

A Direct Laser Sintering Approach for the Electrophoretic Deposition Overlay of Yttria-Stabilized Zirconia on the Surface of a Thermal Barrier Coating System

Rheological behavior of particle-filled polymer suspensions and its influence on surface structure of the coated electrodes

Study of Coatings Formed on Zirconium Alloy by Plasma Electrolytic Oxidation in Electrolyte with Submicron Yttria Powder Additives

Thickness effects on structures and electrical properties of lead zirconate titanate thick films

Liquid Injection Ald of Pb(Zr,Ti)O-X Thin Films by A Combination of Self-Regulating Component Oxide Processes

Development of Uniform and Porous Al Coatings on FeCrAl Substrate by Electrophoretic Deposition

Influence of Al Particle Size and Lead Zirconate Titanate (PZT) Volume Fraction on the Dielectric Properties of PZT-Epoxy-Aluminum Composites

Preparation and characterization of lead zirconate titanate thick films prepared by chemical solution deposition for MEMS applications

Preparation and Application of Lead Zirconate Titanate (PZT) Films Deposited by Hybrid Process: Sol-Gel Method and Laser Ablation

Effect of the polystyrene particle size on dielectric and piezoelectric properties of PZT piezoelectric ceramics via vat photopolymerization (VPP)

Shape-controlled synthesis of lead zirconate titanate nanocrystallites, microrods, microrolls and 3D complex architectures via the effects of poly-vinylalcohol macromolecular conformation