Abstract:Material extrusion additive manufacturing of metals has found widespread application and is typically thought of as a facile technique to create metal components. This can be undertaken without the need for energy sources typically used in direct energy deposition and powder bed fusion processes. Despite recent advances in achieving net shape and improvements to material/component integrity, these processes are characterized by performance limiting defects which often emerge as a result of deposition strategy and are retained post sintering. Although the debinding and sintering steps have been investigated for metal injection molding technology, quantitative studies of defect evolution are lacking. This work proposes an approach to study the pore evolution behavior from deposition to sintering through X-ray Computed Tomography (XCT) image processing. Quantitative results of pore shrinking, partial and full closure through backtracking of individual pores from the sintered to the green state are presented. It is shown that where pores are larger than 4 × 10 -6 mm 3 , equals to the D 90 of the feedstock metal particles, these cannot be fully closed upon sintering and will survive to limit the performance of the final part. The average pore shrinkage is by a factor of 5.6 and partial closure happens in pores with minimum Feret diameter of 33 μm, equals to 160% of the D 90 powder particle, or less. The utilization of overfill as a proposed technique in the literature for the elimination of macro pores is investigated, yielding disparate and unsatisfactory results. This discrepancy can be attributed to the insufficient formation of micro-channels within the pore structure during the deposition process of the aqueous feedstock, leading to regions of weak grain bonding. To evaluate the contribution of these to undermining material integrity, tensile tests of linear and circular deposition strategies are undertaken. Experiments show that track interface length plays a major role in determining elongation to failure and tensile strength. It is concluded that the limitation to the mechanical properties of metal paste extrusion components originates from the emergence of defects and their characteristics after the completion of the processing, as opposed to being influenced by the metallurgy prior or post sintering.

Role of porosity defects in metal 3D printing: Formation mechanisms, impacts on properties and mitigation strategies

Effect of Porosity on Mechanical Properties of 3D Printed Polymers: Experiments and Micromechanical Modeling Based on X-Ray Computed Tomography Analysis

Analysis, classification and remediation of defects in material extrusion 3D printing

Effects of porosity on the mechanical properties of additively manufactured components: a critical review

Effects of defects on mechanical properties in metal additive manufacturing: A review focusing on X-ray tomography insights

Publisher Correction: Pore Elimination Mechanisms During 3D Printing of Metals

Pore defects in Laser Powder Bed Fusion: Formation mechanism, control method, and perspectives

Defects and anomalies in powder bed fusion metal additive manufacturing

Defects in Metal Additive Manufacturing: Formation, Process Parameters, Postprocessing, Challenges, Economic Aspects, and Future Research Directions

Universal Scaling Laws of Keyhole Stability and Porosity in 3D Printing of Metals

Effects of 3D-printing processing parameters on FFF parts' porosity: outlook and trends

Experimental and Theoretical Studies on 3D Printed Short and Continuous Carbon Fiber Hybrid Reinforced Composites

Evolution of Manufacturing Defects of 3D-Printed Thermoplastic Composites with Processing Parameters: A Micro-CT Analysis

Defect Evolution and Mitigation in Metal Extrusion Additive Manufacturing: from Deposition to Sintering

Defects in Metal Additive Manufacturing Processes

Structure-Processing-Property Relationships of 3D Printed Porous Polymeric Materials

A high-fidelity comprehensive framework for the additive manufacturing printability assessment

Controlling interdependent meso-nanosecond dynamics and defect generation in metal 3D printing

Defect and Distortion in Powder Bed Fusion of Metal Additive Manufacturing Parts

Regulation of the Interface Compatibility of the 3D-Printing Interpenetration Networks Toward Reduced Structure Anisotropy and Enhanced Performances

Design of 3D-printed metal micro-truss porous configurations with geometric inhomogeneity