Stability analysis on the Unit 3 gravity concrete dam foundation of the Three Gorges Project

Yujie Wang,Zuyu Chen,P. Sun

DOI: https://doi.org/10.1360/N092017-00022

2017-07-19

Abstract:The concerns over the left dam section stability on potential deep seated rock discontinuities presented one of the key technical problems of the Three Gorges Project. The authors’ research group conducted a field survey that collected nearly 2000 discontinuities and a joint mapping technique with a conclusion that the join persistency ratio along the dominating sear direction is about 70%. The author also found that the ‘method of identical K ’ specified in the code for dam foundation stability analysis is equivalent to the upper bound, or Sarma’s method, thus, a generalized ‘method of identical K ’ is made possible for this project that has composite shape of slip surfaces. Further, stability analyses based on reliability index and partial factors have been performed to provide an in-depth study on this stability analysis problem. The 2D study indicated that for two cases of failure modes the designed section unit 3 satisfies the requirement for allowable factor of safety if the dam and powerhouse are connected to withstand the water pressure. However, if the powerhouse is designed to be separated to the dam, both cases cannot meet the requirement. As an in-depth study, the authors further provide the reliability indices and factors of safety based on the partial factors associated with the above-mentioned cases, giving the same conclusions. The information obtained from the field measured data confirmed the safe performance of the dam.

Engineering,Geology