Abstract:A novel technical solution about helically coiled tube-in-tube (HCTT) heat exchanger with double cooling source is proposed to obtain regeneratively cooled air for advance aeroengine. 54 simulation runs are performed according the Box-Behnken design table, in which the effect of geometrical and operating parameters on performance of heat exchanger are well considered. Grid independence was carefully carried out referring to ASME V&V 20–2009. The simulation model is validated based on comparison with available experimental data and analysis of flow pattern. The performance of the HCTT heat exchanger i.e. entropy generation number Ne, absorption heat ratio of the inner tube η, and out temperature of the regeneratively cooled air Ta,out were evaluated using Response Surface Methodology. The significance of each term in regression model has been checked by analysis of variance. The results shows that all the design variables are significant for predicting Ne, η, and Ta,out, except non-dimensional coil pitch λ for finding η; the regression models have a good prediction performance; outer tube curvature ratio (δo) is the most significant structure parameter affecting Ne and Ta,out, while inner tube curvature ratio (δi) is the most significant linear term for predicting η, indicating that δo and δi are key structure parameters. It also shows that heat transfer characteristics of the HCTT heat exchanger are complicated engineering problem subjected to multi factors interaction. For instance, total number of terms in model for predicting η reaches to 18, including 5 linear terms, 10 interaction terms along with 3 square terms. The influences of all interaction terms on Ne, η, and Ta,out were displayed using 3D surface graph, the effect rule of interaction terms were discussed in details. Desirability function approach was employed to conduct multi-objective optimization for goals of Ta,out = 630 K, and minimum Ne and η. The optimum values of design variable were obtained. This method possesses practical significances for prediction and optimization of HCTT heat exchanger.

Multi-objective optimization of two-phase ice slurry flow and heat transfer characteristics in helically coiled tubes with RSM and NSGA-II

Numerical investigation of hydraulic and heat transfer characteristics of two-phase ice slurry in helically coiled tubes

Multi-objective Optimization of Transpiration Cooling for High Pressure Turbine Vane

Numerical Analysis of Heat Transfer Behaviours of Melting Process for Ice Thermal Storage Based on Various Heat Source Configurations

Experimental study of double direct contact ice slurry generator

Analysis of Ice Slurry Production by Direct Contact Heat Transfer of Air and Water Solution

Analysis, prediction and multi-objective optimization of helically coiled tube-in-tube heat exchanger with double cooling source using RSM

Analysis and Optimization of Thermo-Hydraulic Characteristics of Phase Change Slurry in Wavy MCHS with Porous Fins Based on RSM and Desirability Methods

Parametric optimization of a spiral ground heat exchanger by response surface methodology and multi-objective genetic algorithm

Experimental investigation on the particle size distribution characteristics of ice slurry in double-tube heat exchanger

Multi-objective optimization of mini U-channel cold plate with SiO2 nanofluid by RSM and NSGA-II

Thermo-Hydrodynamics of a Helical Coil Heat Exchanger Operated with a Phase-Change Ice Slurry as a Refrigerant

Thermo-fluidic Characteristics of Ice Slurry in Horizontal Circular Pipes

Multi-objective optimization of a double helical coil heat exchanger using response surface method and genetic algorithm

Multi-objective optimization research of printed circuit heat exchanger based on RSM and NSGA-II

Flow pattern analysis and multi-objective optimization of helically corrugated tubes used in the intermediate heat exchanger for nuclear hydrogen production

Numerical investigation on heat and mass transfer characteristics of ice slurry in pulsating flow

Multi-objective optimization of multi-channel cold plate under intermittent pulsating flow by RSM and NSGA-II for thermal management of electric vehicle lithium-ion battery pack

Experimental Investigation of Flow and Heat Transfer Characteristics in the Generation of Clathrate Hydrate Slurry

Numerical investigation on the impact of different design arrangements of helical heat exchangers with varying cross-sections utilizing ternary hybrid nanofluids

Multi-Objective Optimization of a Microchannel Heat Sink Combining Cavities and Longitudinal Vortex Generators Based on Cfd and Nsga-Ii Genetic Algorithm