Abstract:Nickel-rich layered oxides, as the most promising commercial cathode material for high-energy density lithium-ion batteries, experience significant surface structural instabilities that lead to severe capacity deterioration and poor thermal stability. To address these issues, radially aligned grains and surface LixNiyWzO-like heterostructures are designed and obtained with a simple tungsten modification strategy in the LiNi0.91Co0.045Mn0.045O2 cathode. The formation of radially aligned grains, manipulated by the WO3 modifier during synthesis, provides a fast Li+ diffusion channel during the charge/discharge process. Moreover, the tungsten tends to enter into the lattice of the primary particle surface, and the armor-type tungsten-rich heterostructure protects the bulk material from microcracks, structural transformations, and surface side reactions. First-principles calculations indicate that oxygen is more stable in the surface tungsten-rich heterostructure than elsewhere, thus triggering an improved surface structural stability. Consequently, the 2 wt % WO3-modified LiNi0.91Co0.045Mn0.045O2 () material shows outstanding prolonged cycling performance (capacity retention of 80.85% after 500 cycles) and excellent rate performance (5 C, 188.4 mA h g–1). In addition, its layered-to-rock salt phase transition temperature is increased by 80 °C compared with that of the pristine cathode. This work provides a novel surface modification approach and an in-depth understanding of the overall performance enhancement of nickel-rich layered cathodes.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c12893?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c12893</a>.SEM images of the raw materials; SEM images of the intermediate materials; SEM images for the lithiated cathode materials; cross-sectional images; TEM images with EDS mapping and line scans; XRD patterns for the lithiated cathode materials; Rietveld fitting results for the XRD patterns; DFT calculation models of a W atom in different substitution sites; XPS spectra and fitting results; electrochemical performance between 2.5 and 4.3 V; electrochemical performance between 2.7 and 4.5 V; full pouch-type cell cyclability; GITT curves; cyclic voltammogram curves; in situ XRD patterns during the charging process; X-ray diffraction patterns after 200 cycles; equivalent circuit of EIS fitting; schematic illustration of the fading mechanism; in situ XRD patterns during the heating experiment; DSC profiles; TG/DSC profiles; DFT calculation models in different sites; ICP-AES results; crystallographic results; XPS fitting results; cycling performance results; rate performance results; GITT results; comparison of electrochemical performance results; EIS results; and charges gain/loss results (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c12893/suppl_file/am0c12893_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Constructing nano spinel phase and Li + conductive network to enhance the electrochemical stability of ultrahigh-Ni cathode

Constructing electrochemically stable single crystal Ni-rich cathode material via modification with high valence metal oxides

Stabilizing high-Ni cathodes with gradient surface Ti-enrichment

Regulating the Grain Orientation and Surface Structure of Primary Particles through Tungsten Modification to Comprehensively Enhance the Performance of Nickel-Rich Cathode Materials

Nanoscale Manipulation of Spinel Lithium Nickel Manganese Oxide Surface by Multisite Ti Occupation As High‐Performance Cathode

Enhancing the Structural Stability and Electrochemical Performance of High-Nickel Cathode Materials through Ti Doping with an Exothermic Non-oxide Precursor

Enhancing the Integral Structural and Thermal Stability of Ultrahigh-Ni Cathodes via Morphology Refinement and In Situ Interfacial Engineering

Synergistic Effect of B-Nb Co-modified to Achieve Crystal Structure and Interface Tuning for Ni-rich Cathode

One-Step Synthesis of a Single-Crystal LiNi 0.83 Co 0.11 Mn 0.06 O 2 Cathode with Excellent Electrochemical Properties by Ti 4+ Doping and LiTi 2 O 4 In Situ Chemical Coating Using a Novel Variable Temperature Sintering Process

Enhancing chemomechanical stability and high-rate performance of nickel-rich cathodes for lithium-ion batteries through three-in-one modification

The role of tungsten-related elements for improving the electrochemical performances of cathode materials in lithium ion batteries

Improving the Performance of LiNi0.925Co0.065Mn0.01O2 via Ti4+& Nb5+ Co-Modifications

Dual-Functional Tungsten Boosted Lithium-Ion Diffusion and Structural Integrity of LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathodes for High Performance Lithium-Ion Batteries

Surface Atomic Rearrangement with High Cation Ordering for Ultra-Stable Single-Crystal Ni-Rich Co-Less Cathode Materials

Suppressing the Structure Deterioration of Ni-Rich LiNi0.8Co0.1Mn0.1O2 Through Atom-Scale Interfacial Integration of Self-Forming Hierarchical Spinel Layer with Ni Gradient Concentration

Improving the Performance of LiNi 0.925 Co 0.065 Mn 0.01 O 2 via Ti 4+ & Nb 5+ Co-Modifications

A Universal Method for Enhancing the Structural Stability of Ni-Rich Cathodes Via the Synergistic Effect of Dual-Element Cosubstitution

Tungsten and Phosphate Polyanion Co-Doping of Ni-ultrahigh Cathodes Greatly Enhancing Crystal Structure and Interface Stability

Modifying surface chemistry and stress concentration to enable highly stable ultrahigh-Ni cathodes

In-situ Ti4+-doped modification of layer-structured Ni-rich LiNi0.83Co0.11Mn0.06O2 cathode materials for high-energy lithium-ion batteries

Chemical-Mechanical Effects in Ni-Rich Cathode Materials