Abstract:Manipulating the local electronic structure is employed to address the capacity/voltage decay and poor rate capability of Li‐rich layered cathodes (LLOs) via the dual‐doping of Na+ and F− ions, as well as the regulation of Li+/Ni2+ intermixing and the content of "LiOLi" configuration. The designed cathode exhibits a high initial Coulombic efficiency of about 90%, large specific capacity of 296 mAh g−1 and energy density of 1047 Wh kg−1 at 0.2 C, and a superior rate capability of 222 mAh g−1 at 5 C with a good capacity retention of 85.7% even after 500 cycles. And the operating voltage is increased without compromising the high‐capacity advantage. Such improved electrochemical performances primarily result from the band shift of the TM 3d‐O 2p and non‐bonding O‐2p to lower energy, which would decrease Li+ diffusion activation energy and increase oxygen vacancy forming energy, finally improving the Li+ diffusion kinetics and stabilizing lattice oxygen. Moreover, the increased "LiOLi" configuration in the Li2MnO3 phase via increasing the Mn concentration can increase the reversible capacity to offset the negative effect of inactive doping and Li+/Ni2+ intermixing. This strategy of modulating the local electronic structure of LLOs provides great potential to design high‐energy‐density Li‐ion batteries.

Integrating a Ferroelectric Interface with a Well-Tuned Electronic Structure in Lithium-Rich Layered Oxide Cathodes for Enhanced Lithium Storage

Stable Heteroepitaxial Interface of Li-rich Layered Oxide Cathodes with Enhanced Lithium Storage

In Situ Formed Heterostructure Interface and Well-Tuned Electronic Structure Ensuring Long Cycle Stability for 4.9 V High-Voltage Li-Rich Layered Oxide Cathodes

Engineering Hetero-Epitaxial Nanostructures with Aligned Li-ion Channels in Li-rich Layered Oxides for High-Performance Cathode Application

Heteroepitaxial oxygen-buffering interface enables a highly stable cobalt-free Li-rich layered oxide cathode

Self-compacting engineering to achieve high-performance lithium-rich layered oxides cathode materials

Interfacial-engineering-enabled High-Performance Li-rich Cathodes

Interphase Engineering by Electrolyte Additives for Lithium-Rich Layered Oxides: Advances and Perspectives

Facile Morphology Modulation to Enhance Stability and Fast Kinetics of Anionic Redox for Li-Rich Layered Oxides Cathodes

Manipulating the Local Electronic Structure in Li‐Rich Layered Cathode Towards Superior Electrochemical Performance

In Situ Reconstruction of the Spinel Interface on a Li-Rich Layered Cathode Material with Enhanced Electrochemical Performances through HEPES and Heat Treatment Strategy

Heterostructured lithium-rich layered oxides core@ spinel- MgAl2O4 shell as high-performance cathode for lithium-ion batteries

Composite Nanostructure Construction on the Grain Surface of Li‐Rich Layered Oxides

Achieving high structure and voltage stability in cobalt-free Li-rich layered oxide cathodes via selective dual-cation doping

Suppressing Bulk Strain and Surface O2 Release in Li-Rich Cathodes by Just Tuning the Li Content

Enhanced Cycling Stability of Lithium-Rich Cathode Materials Achieved by in-situ Formation of LiErO2 Coating

Fast Charge-Transport Interface on Primary Particles Boosts High-Rate Performance of Li-Rich Mn-Based Cathode Materials.

Regulating oxygen covalent electron localization to enhance anionic redox reversibility of lithium-rich layered oxide cathodes

Manipulating Charge‐Transfer Kinetics of Lithium‐Rich Layered Oxide Cathodes in Halide All‐Solid‐State Batteries

Al/Ti Synergistic Doping Enhanced Cycle Stability of Li‐Rich Layered Oxides

Tailoring Electrolyte Solvation to Push the Capacity Limit of Layered Oxide Cathodes via Polarized Ferroelectric Polymers