Abstract:Low-loss single-band, dual-band, and broadband terahertz (THz) interconnects for THz system-on-package heterogeneous system integration are proposed in this article. Transmission lines deployed on a 0.18-m Complementary Metal-Oxide-Semiconductor (CMOS) chip and an integrated-passive-devices carrier, respectively, are coupled electromagnetically as the chip is flip-chip packaged onto the carrier using low-cost gold stud bumps. By doing this, two pairs of quarter-wave coupled lines can be formed to realize a low-loss THz interconnect for transiting a signal from the chip to the carrier. Moreover, single-band and dual-band operations can be acquired by designing the coupled lines to have a length of ${lambda}$4 and ${lambda}$4 and 3${lambda}$4 at the frequencies of interest, respectively. The gold stud bumps are also employed to realize a broadband directly-connected THz interconnect which transfers a signal from an on-chip microstrip line to an on-carrier microstrip line in a low-loss and broadband manner. A theoretical analysis using signal flow graphs and Mason's rule is conducted to provide design guidelines. Experimental results show that the proposed single-band, dual-band, and broadband THz interconnects can provide the insertion losses of 1.7, 2.7 and 2.9 dB, and lower than 3.3 dB at 306.5, 140 and 324.5 GHz, and from 140 to 330 GHz, with the return loss better than 10 dB from 256.5 to 330, 140 to 182 and 280 to 330, and 140 to 330 GHz, respectively. To the best of the authors knowledge, the proposed THz interconnect demonstrates the first dual-band operation reported thus far.

A corrugated planar-Goubau-line termination for terahertz waves

Sub-THz Interconnect for Planar Chip-to-Chip Communications

Capacitively-Coupled Resonators for Terahertz Planar-Goubau-Line Filters

An Isolated H-plane Terahertz Waveguide T-junction with Corrugated Microstrip Loads

Accurate Calculation of Terahertz Attenuation of a Dielectric-Coated Metal Wire with an Intervening Air Gap Using the Engineering Approach

Novel Low-Loss 0.65-Thz Multisectional Folded Waveguide High-Frequency Circuit

Analytic modelling of a planar Goubau line with circular conductor

Broadband Terahertz Generation in a Corrugated Waveguide with matched Phase and Group Velocities

Low-Loss Single-Band, Dual-Band, and Broadband mm-Wave and (Sub-)THz Interconnects for THz SoP Heterogeneous System Integration

A Novel Quadruple Corrugated Waveguide Slow-Wave Structure for Terahertz Applications

Graphene Loaded Double Ridge Plasmon Terahertz Waveguide

Planar Metamaterial for Matched Waveguide Termination

A terahertz-band branch waveguide directional coupler based on micro-machining

Design and Cold-Test of 0.34-THz Modified Slotted Sine Waveguide Traveling Wave Tube

THz-wave propagation characteristics of TSV-based transmission lines and interconnects

An Ultra-Broadband Conductor-Backed Coplanar Waveguide with Sine Edges

Fabrication of THz corrugated wakefield structure and its high power test

Design of subwavelength corrugated metal waveguides for slow waves at terahertz frequencies.

Study of transmission line attenuation in broad band millimeter wave frequency range

50 Ohm Transmission Lines with Extreme Wavelength Compression Based on Superconducting Nanowires on High-Permittivity Substrates

Terahertz monolithic integrated waveguide transmission lines based on wide bandgap semiconductor materials