Abstract:The implementation of hydrogen as a fuel in internal combustion engines is widely considered a favorable optimal due to its zero-carbon emissions and high energy content. Heat transfer from engine cylinder walls has a major role on engine combustion, performance and emission characteristics. In this study, heat transfer analysis conducted by different heat transfer models and identify the best model to analyse the energy and exergy analysis of hydrogen enriched internal combustion engine. A series of experiments were conducted on a compressed natural gas internal combustion engine across varying hydrogen fractions, EGR ratios, engine speeds and load conditions to capture in-cylinder pressure data and heat transfer rate. The authors compared six distinct models for heat transfer based on absolute percentage errors of maximum pressure and indicated mean effective pressure. These models systematically incorporated into a quasi-dimensional combustion model (QDCM) on MATLAB for hydrogen-compressed natural gas engine, accounting for diverse operating conditions. Convective heat transfer models, including Woschni, Nusselt, Hohenberg, Han, Eichelberg, and Assanis correlations were employed. Comparative analyses were undertaken to identify the most precise correlation for predicting engine in-cylinder pressure and heat transfer rates with experimental results across a broad spectrum of operational conditions. The Woschni model, as presented, is most suitable for the QDCM of the hydrogen-compressed natural gas fuel blend. This suitability is indicated by the close alignment of Taylor length and turbulent intensity coefficients to 1, as well as the minimal absolute percentage error observed for indicated mean effective pressure. It is also observed that heat transfer rate is increased by increasing the engine load 25 %, 50 %, 75 % and 100 % as 49.57 J/deg, 129.26 J/deg, 245.35 J/deg and 250.62 J/deg respectively and heat transfer rate is decreased by increasing the speed of engine 1100 rpm, 1200 rpm, 1500 rpm and 1700 rpm as 137.34 J/deg, 134.21 J/deg, 95.33 J/deg and 48.57 J/deg respectively. The energy and exergy analyses revealed that elevating the engine load corresponds to a reduction in exergy destruction. Brake energy increased 15 % by increasing the load conditions from 25 % to 100 % and decreased 7 % by increasing the speed from 1100 rpm to 1700 rpm. Another significant finding from this study is that the values of both energy and exergy efficiencies were 38.42 % and 40.12 % respectively obtained by thermodynamic analyses.

Energy-Exergy Analysis and Optimal Design of a Hydrogen Turbofan Engine

Conceptual Design and Optimization of Scramjet Engines Using the Exergy Method

Thermodynamics, Environmental and Sustainability Impacts of a Turbofan Engine Under Different Design Conditions Considering Variable Needs in the Aviation Industry

Energy and exergy analysis for a turbocharged direct-injection hydrogen engine to achieve efficient and high-economy performances

Performance optimization for an advanced geared turbofan engine integrated with cooled cooling air heat exchangers

Comparative Analysis of Different Heat Transfer Models, Energy and Exergy Analysis for Hydrogen-Enriched Internal Combustion Engine under Different Operation Conditions

Transient Modeling and Performance Analysis of Hydrogen-Fueled Aero Engines

Systematic benchmarking of performance, environmental and sustainability impacts of utilization of alternative cleaner fuel in an aircraft gas turbine engine

Performance Evaluation and Off-Design Strategy of a High Temperature Proton Exchange Membrane Fuel Cell Turbine-Less Hybrid System for Low Pressure Ratio and Mach Number Aircraft

Advanced Exergy and Graphical Exergy Analyses for Solid Oxide Fuel Cell Turbine-Less Jet Engines

Exergy analysis of a turboprop engine at different flight altitude and speeds using novel consideration

Optimisation of energy and exergy of two-spool turbofan engines using genetic algorithms

First and Second Law Analysis of Intercooled Turbofan Engine

Thermodynamic Analysis of the Influential Mechanism of Fuel Properties on the Performance of an Indirect Precooled Hypersonic Airbreathing Engine and Vehicle

Performance Analysis Of A Turbofan Engine Integrated With Solid Oxide Fuel Cells Based On Al-H2o Hydrogen Production For More Electric Long-Endurance Uavs

Performance assessment for a novel supersonic turbine engine with variable geometry and fuel precooled: From feasibility, exergy, thermoeconomic perspectives

Off-design performance improvement of twin-shaft gas turbine by variable geometry turbine and compressor besides fuel control

Optimization of combustion and performance parameters by intake-charge conditions in a small-scale air-cooled hydrogen fuelled SI engine suitable for use in piston-prop aircraft

0-D Dynamic Performance Simulation of Hydrogen-Fueled Turboshaft Engine

Thermodynamic responses of bleed air on separated flow high by-pass turbofan engine under constant speed and constant thrust cases

Optimized modeling of energy and environmental metrics of mixed flow turbofan engine used regional aircraft