Abstract:The direct injection hydrogen internal combustion engines avoid backfires and have a higher power density, especially when coupled with a turbocharger. However, while previous researches have focused on specific aspects of direct injection hydrogen internal combustion engines, their whole combustion characteristics remain largely unclear. Therefore, this study aims to comprehensively investigate the combustion characteristics of turbocharged direct injection hydrogen internal combustion engines across the entire operating map in order to optimize their performance. The combustion characteristics are hypothesized to be significantly influenced by operating parameters, including the equivalence ratio, spark timing, start of injection, and other relevant factors. To achieve this, the experiments were conducted on a 2.0 L turbocharged direct injection hydrogen internal combustion engine, covering a wide range of operating conditions. Specifically, the engine speeds varied from 1000 to 4000 rpm, loads ranged from 3.7 to 10.6 bar, equivalence ratios spanned from 0.33 to 0.71, spark timing was adjusted within a range of 21 degrees of crank angle, and start of injection varied within a range of 80 degrees of crank angle. The experimental results reveal notable findings regarding the turbocharged direct injection hydrogen internal combustion engine. For instance, the maximum pressure rise rate of the turbocharged direct injection hydrogen internal combustion engine (3.85 bar/°CA at 1500 rpm) at various engine speeds at wide open throttle are greater than those of a turbocharged port fuel injection hydrogen internal combustion engine and a gasoline engine. Furthermore, variations in equivalence ratio and spark timing cause significant increases in pressure rise rate by 328.4% and 233.3%, respectively. The peak pressure rise rate characteristics provide valuable insights for optimizing the noise, vibration and harshness of turbocharged direct injection hydrogen internal combustion engines. Additionally, the burning duration demonstrates an initial increase and subsequent decrease with changes in the start of injection, aiding in the determination of the optimal start of injection for achieving high brake thermal efficiency. Overall, this research provides valuable insights into the macroscopic combustion characteristics of a turbocharged direct injection hydrogen internal combustion engine across different operating conditions. These findings not only can be directly applied to hydrogen internal combustion engines of the same displacement and type, but also can be applied to the design and development of hydrogen internal combustion engines with different displacements and types.

Energy and exergy analysis for a turbocharged direct-injection hydrogen engine to achieve efficient and high-economy performances

Development of a turbocharged direct-injection hydrogen engine to achieve clean, efficient, and high-power performance

Optimal control strategy of the turbocharged direct-injection hydrogen engine to achieve near-zero emissions with large power and high brake thermal efficiency

Experimental study on the combustion and emission performance of the hydrogen direct injection engine

Experimental Study on Performance and Emission of an Electric Turbocharged Hydrogen Direct Injection Engine

Performance optimization design of direct injection turbocharged hydrogen internal combustion engine

Combustion characteristics of a turbocharged direct-injection hydrogen engine

Impact of hydrogen direct injection on engine combustion and emissions in a GDI engine

Experimental investigation of the achieving methods and the working characteristics of a near-zero NOx emission turbocharged direct-injection hydrogen engine

Experimental investigation of the working boundary limited by abnormal combustion and the combustion characteristics of a turbocharged direct injection hydrogen engine

Comparative Analysis of Different Heat Transfer Models, Energy and Exergy Analysis for Hydrogen-Enriched Internal Combustion Engine under Different Operation Conditions

Numerical investigation on gaseous fuel injection strategies on combustion characteristics and NO emission performance in a pure hydrogen engine

Effect of hydrogen direct injection on natural gas/hydrogen engine performance under high compression-ratio conditions

Direct injection of hydrogen main fuel and diesel pilot fuel in a retrofitted single-cylinder compression ignition engine

Energy-Exergy Analysis and Optimal Design of a Hydrogen Turbofan Engine

Effect of Excessive Air Ratio on Hydrogen-fueled Spark Ignition Engine with High Compression Ratio Using Direct Injection System toward Higher Brake Power and Thermal Efficiency

Combustion and emission characteristics of a hydrogen-diesel dual-fuel engine

Study on the Effects of the Hydrogen Substitution Rate on the Performance of a Hydrogen–Diesel Dual-Fuel Engine under Different Loads

Combined experimental-numerical analysis of hydrogen as a combustion enhancer applied to wankel engine

Experimental Study on the Impact of Hydrogen Injection Strategy on Combustion Performance in Internal Combustion Engines

Experimental Study of the Influences of Operating Parameters on the Performance, Energy and Exergy Characteristics of a Turbocharged Marine Low-Speed Engine