Abstract:Purpose Spark ignition (SI) engines are used in a wide area in the transportation industry, from road vehicles to piston-prop aircraft. On the other hand, the decrease in reserves of fossil fuels used in SI engines and the increase in greenhouse gas emissions makes the use of alternative fuels inevitable. In this paper, optimization of in-cylinder combustion and engine performance parameters by intake-charge conditions [i.e. intake-air temperature, injection timing and exhaust gas recirculation (EGR)] in a hydrogen (H 2 )-fueled small SI engine is performed. Design/methodology/approach Experimental studies were performed at a 1,600 rpm engine speed of a single-cylinder, air-cooled engine having a stroke volume of 476.5 cm 3 , maximum output power of 13 HP and torque of 25 Nm. The hydrogen-fueled SI engine was operated by a lean air-fuel mixture ( φ = 0.6) under wide-open throttle (WOT) conditions. Findings The findings of the paper show that improvements can be achieved in in-cylinder combustion, indicated engine performance, exhaust NO x emissions with optimum intake-air temperature, the start of H 2 injection and the ERG rate. Practical Implications It has been determined that a 32°C intake-air temperature, 395°C (bTDC) start of H 2 injection, and 5%–10% EGR rates are the most suitable values for the examined hydrogen fueled SI engine. Originality Value Hydrogen is a usable alternative fuel for SI engines used in a wide area from road vehicles to piston-prop aircraft engines. However, a number of problems remain that limit hydrogen fueled SI engines to some extent, such as backfire, a decrease of engine power, and high NO x emissions. Therefore, it is appropriate to examine the effects of intake-charge conditions on in-cylinder combustion, engine performance, and NO x emissions parameters in a hydrogen fuelled SI engine.
What problem does this paper attempt to address?
This paper aims to solve the problems encountered in the application of hydrogen - fueled spark - ignition (SI) engines in small piston - propeller aircraft, specifically including:
1. **Improve combustion efficiency**: Optimize the intake conditions (such as intake temperature, hydrogen injection timing, exhaust gas recirculation rate, etc.) to improve the in - cylinder combustion process, thereby improving engine performance.
2. **Reduce nitrogen oxide emissions**: Research how to reduce the emissions of nitrogen oxides (NOx) by adjusting the intake conditions, which is of great significance for environmental protection.
3. **Solve technical problems**: Explore how to overcome the technical challenges faced by hydrogen - fueled SI engines in practical applications, such as backfire phenomenon (flame backflow into the intake pipe), engine power reduction, etc.
### Main research contents of the paper:
- **Experimental design and method**: Conduct experiments on a single - cylinder, air - cooled, hydrogen - fueled SI engine. The engine speed is 1,600 rpm, the displacement is 476.5 cm³, the maximum output power is 13 HP, and the maximum torque is 25 Nm. Different intake temperatures, hydrogen injection timings and exhaust gas recirculation rates (EGR) are used in the experiment.
- **Experimental results**:
- **Influence of intake temperature**: When the intake temperature increases from 20°C to 32°C, the in - cylinder pressure, the average gas temperature and the apparent heat release rate (AHRR) all increase, and their maximum values are closer to the top dead center (TDC). However, when the intake temperature further increases to 38°C, these parameters decrease instead due to the decrease in volumetric efficiency.
- **Influence of hydrogen injection timing**: When the hydrogen injection timing is 395°CA (bTDC), the indicated mean effective pressure (IMEP) reaches the maximum value, which is about 4% higher than that at other injection timings. At the same time, the combustion period is shortened and the combustion speed is increased.
- **Influence of exhaust gas recirculation rate**: As the EGR rate increases, the IMEP first increases and then tends to be stable, and the NOx emissions are significantly reduced (about 9%), but the volumetric efficiency decreases.
### Practical significance:
- **Optimal intake conditions**: The research shows that the intake temperature of 32°C, the hydrogen injection timing of 395°CA (bTDC) and the EGR rate of 5% - 10% are the most suitable intake conditions for this hydrogen - fueled SI engine.
- **Environment - friendly**: By optimizing the intake conditions, the NOx emissions can be significantly reduced, making the hydrogen - fueled SI engine more environmentally friendly.
- **Performance improvement**: The optimized intake conditions can improve the combustion efficiency and overall performance of the engine, making it more suitable for application in small piston - propeller aircraft.
### Innovation value:
Hydrogen fuel, as a clean alternative fuel, has great potential in a wide range of application fields (from road vehicles to piston - propeller aircraft). However, hydrogen - fueled SI engines still face some limitations, such as backfire, engine power reduction and high NOx emissions. Therefore, studying the influence of intake conditions on in - cylinder combustion, engine performance and NOx emissions has important practical significance.