Abstract:The 2nd generation VLTI instrument GRAVITY is a two-field infrared interferometer operating in the K band between 1.97 and 2.43 $\mu$m with either the four 8 m or the four 1.8 m telescopes of the Very Large Telescope (VLT). Beams collected by the telescopes are corrected with adaptive optics systems and the fringes are stabilized with a fringe-tracking system. A metrology system allows the measurement of internal path lengths in order to achieve high-accuracy astrometry. High sensitivity and high interferometric accuracy are achieved thanks to (i) correction of the turbulent phase, (ii) the use of low-noise detectors, and (iii) the optimization of photometric and coherence throughput. Beam combination and most of the beam transport are performed with single-mode waveguides in vacuum and at low temperature. In this paper, we present the functions and performance achieved with weakly birefringent standard single-mode fiber systems in GRAVITY. Fibered differential delay lines (FDDLs) are used to dynamically compensate for up to 6 mm of delay between the science and reference targets. Fibered polarization rotators allow us to align polarizations in the instrument and make the single-mode beam combiner close to polarization neutral. The single-mode fiber system exhibits very low birefringence (less than 23°), very low attenuation (3.6-7 dB/km across the K band), and optimized differential dispersion (less than 2.04 $\mu$rad cm2 at zero extension of the FDDLs). As a consequence, the typical fringe contrast losses due to the single-mode fibers are 6% to 10% in the lowest-resolution mode and 5% in the medium- and high-resolution modes of the instrument for a photometric throughput of the fiber chain of the order of 90%. There is no equivalent of this fiber system to route and modally filter beams with delay and polarization control in any other K-band beamcombiner.

Beam combiner for the Asgard/BIFROST instrument

Asgard/NOTT: water vapor and CO$_2$ atmospheric dispersion compensation system

A six-apertures discrete beam combiners for J-band interferometry

Heimdallr, Baldr and Solarstein: designing the next generation of VLTI instruments in the Asgard suite

An infrared integrated optic astronomical beam combiner for stellar interferometry at 3-4 microns

Asymmetric Beam Combination for Optical Interferometry

Asgard/NOTT: L-band nulling interferometry at the VLTI. II. Warm optical design and injection system

Practical demonstration of a six-telescope integrated optics beam combiner for the astronomical J- and H-band manufactured with ultrafast laser inscription

Heimdallr and Solarstein: alignment, calibration, and correction in the Asgard suite at the VLTI

On-chip spectro-detection for fully integrated coherent beam combiners

Photonic beam-combiner for visible interferometry with SCExAO/FIRST: laboratory characterization and design optimization

Pushing high angular resolution and high contrast observations on the VLTI from Y to L band with the Asgard instrumental suite: integration status and plans

A simple beam combination for stellar interferometry

Laboratory characterization of FIRSTv2 photonic chip for the study of substellar companions

Novel concept for visible and near infrared spectro-interferometry: laser-written layered arrayed waveguide gratings

Mapping the aberrations of a wide-field spectrograph using a photonic comb

Bifrost: a Python/C++ Framework for High-Throughput Stream Processing in Astronomy

The Big Fringe Telescope

An Approach to Upgrading the Beam Transport System at the Navy Precision Optical Interferometer

Single-mode waveguides for GRAVITY II. Single-mode fibers and Fiber Control Unit

FALCON: a concept to extend adaptive optics corrections to cosmological fields