Abstract:Multimaterial optical coatings are a promising viable option to meet the challenging requirements (in terms of transmittance, absorbance, and thermal noise) of next-generation gravitational wave detector mirrors. In this paper we focus on ternary coatings consisting of quarter-wavelength-thick layers, where a third material ( H′ ) is added to the two presently in use, namely, silica ( L ) and titania-doped tantala ( H ), featuring higher dielectric contrast (against silica) and lower thermal noise (compared with titania-doped tantala), but higher optical losses. We seek the optimal material sequences , featuring minimal thermal (Brownian) noise under prescribed transmittance and absorbance constraints, by exhaustive simulation over all possible configurations, for different values of the optical density and extinction coefficient of the third material, including the case of amorphous silicon and silicon nitride operating at ambient and cryogenic temperatures. In all cases studied, the optimal designs consist of a stack of (H′|L) doublets topped by a stack of (H|L) doublets, confirming previous heuristic assumptions, and the achievable coating noise power spectral density reduction factor ranges from ∼0.5 at 290 K down to ∼0.1 at 20 K . The robustness of the found optimal designs against layer thickness deposition errors and uncertainties and/or fluctuations in the optical losses of the third material is also investigated. Possible margins for further thermal noise reduction by layer thickness optimization, and strategies to implement it, are discussed. https://doi.org/10.1103/PhysRevResearch.3.023172 Published by the American Physical Society under the terms of the Creative Commons Attribution 4.0 International license. Further distribution of this work must maintain attribution to the author(s) and the published article's title, journal citation, and DOI. Published by the American Physical Society

Characterization of ion-beam-sputtered AlF$_3$ thin films for gravitational-wave interferometers

Optical and mechanical properties of ion-beam-sputtered MgF$_2$ thin films for gravitational-wave interferometers

Optical and mechanical properties of ion-beam-sputtered Nb$_2$O$_5$ and TiO$_2$-Nb$_2$O$_5$ thin films for gravitational-wave interferometers

Development of ion-beam sputtered silicon nitride thin films for low-noise mirror coatings of gravitational-wave detectors

Exploration of co-sputtered Ta$_2$O$_5$-ZrO$_2$ thin films for gravitational-wave detectors

High-Reflection Coatings for Gravitational-Wave Detectors: State of The Art and Future Developments

Ternary quarter wavelength coatings for gravitational wave detector mirrors: Design optimization via exhaustive search

Scratch-resistant Antireflective Coating for Mid-Wave Infrared Band

Amorphous optical coatings of present gravitational-wave interferometers

Study on electro-optic noise in crystalline coatings toward future gravitational wave detectors

Effects of mirror birefringence and its fluctuations to laser interferometric gravitational wave detectors

Mechanical loss in state-of-the-art amorphous optical coatings

Thickness uniformity measurements and damage threshold tests of large-area GaAs/AlGaAs crystalline coatings for precision interferometry

Mapping the Optical Absorption of a Substrate-Transferred Crystalline AlGaAs Coating at 1.5um

Titania Mixed with Silica: A Low Thermal-Noise Coating Material for Gravitational-Wave Detectors

Thermal Noise Reduction and Absorption Optimisation via Multi-Material Coatings

Excess noise and photo-induced effects in highly reflective crystalline mirror coatings

Progress in the measurement and reduction of thermal noise in optical coatings for gravitational-wave detectors

Reduction of mechanical losses in ion-beam sputtered tantalum oxide thin films via partial crystallization

Researches on Non-standard Optics for Advanced Gravitational Waves Interferometers