Abstract:The traditional methods of increasing the chlorine disinfectant dosage in the drinking water distribution system (DWDS) to control microorganisms and improve the safety of drinking water quality are subjected to several challenges. One noticeable problem is the unpleasant odor generated by chlorine and chloramines. However, the generally proposed chlorine dosage optimization model ignores the chloric odor distribution in the DWDS. This study proposes a comprehensive multi-parameter water quality model and aims to balance the trade-offs between: (i) minimize the flavor profile analysis (FPA) degree of the chloric odor produced by chlorine and chloramines in the DWDS, and (ii) minimize the economic investment (chlorine dosage and operation cost). EPANET and back propagation (BP) network integrated with the Borg algorithm were employed as innovative approaches to simulate the chlorine, chloramines, and chloric odor intensity in the DWDS. Moreover, the application of the multi-parameter model was demonstrated in a real-world DWDS case study. 0.5 mg-Cl2/L (mg/L) chlorine at 8 secondary chlorination points was added to the DWDS as an optimized chlorine dosing scheme considering the olfactory and financial objective functions simultaneously. When switching to a superior water source, the FPA of the chloric odor in DWDS increased by a maximum of 1.4 at most if the initial chlorine dosage remained as before. To avoid the occurrence of chloric odor and also control the residual free chlorine (residual chlorine) at a suitable value, the initial and secondary chlorine dosages were optimized to 0.4 mg/L and 0.3 mg/L, respectively. Under this condition, the initial chlorine dosage was reduced by 50% compared to the original operation scheme in City J, China, the qualification rate of the residual chlorine reached 97.2%, basically consistent with that before water source switching, and the chloric odor intensity of the DWDS was controlled below FPA 3.4.

Control-Theoretic Modeling of Multi-Species Water Quality Dynamics in Drinking Water Networks: Survey, Methods, and Test Cases

Chlorine wall decay coefficients calibration of water distribution quality model

Multi-objective Optimization of Water Quality Performance Considering THM in Water Distribution Systems

Chlorine Decay and Trihalomethanes Formation in Water Distribution System

Optimal Operation of Residual Chlorine Concentration in Multi-Source Water Distribution System

Desalinated Seawater into Pilot-Scale Drinking Water Distribution System: Chlorine Decay and Trihalomethanes Formation

Comprehensive Framework for Controlling Nonlinear Multi-Species Water Quality Dynamics

A Novel Statistical Model for Water Age Estimation in Water Distribution Networks

Joint Majorization of Waterworks and Secondary Chlorination Points Considering the Chloric Odor and Economic Investment in the DWDS Using Machine Learning and Optimization Algorithms.

Water Quality Modeling in Sewer Networks: Review and Future Research Directions

How Effective is Model Predictive Control in Real-Time Water Quality Regulation? State-Space Modeling and Scalable Control

Disinfectant Control in Drinking Water Networks: Integrating Advection-Dispersion-Reaction Models and Byproduct Constraints

The dependence of chlorine decay and DBP formation kinetics on pipe flow properties in drinking water distribution.

Model Order Reduction for Water Quality Dynamics

Optimal scheduling and analysis of booster chlorination in water distribution network based on desired chlorine residual mass concentration

Second-order Chlorine Decay and Trihalomethanes Formation in a Pilot-Scale Water Distribution Systems.

[Development and Application of a Multi-Species Water Quality Model for Water Distribution Systems with EPANET-MSX].

Control Node Placement and Structural Controllability of Water Quality Dynamics in Drinking Networks

Water distribution network residual chlorine modeling based on the synergy of chlorine and chlorine dioxide

Modeling of Residual Chlorine in Water Distribution System