Abstract:Clean-burning oxygenated and synthetic fuels derived from renewable power, so-called e-fuels, are a promising pathway to decarbonize compression–ignition engines. Polyoxymethylene dimethyl ethers (PODEs or OMEs) are one candidate of such fuels with good prospects. Their lack of carbon-to-carbon bonds and high concentration of chemically bound oxygen effectively negate the emergence of polycyclic aromatic hydrocarbons (PAHs) and even their precursors like acetylene (C2H2), enabling soot-free combustion without the soot-NOx trade-off common for diesel engines. The differences in the spray combustion process for OMEs and diesel-like reference fuels like n-dodecane and their potential implications on engine applications include discrepancies in the observed ignition delay, the stabilized flame lift-off location, and significant deviations in high-temperature flame morphology. For CFD simulations, the accurate modeling and prediction of these differences between OMEs and n-dodecane proved challenging. This study investigates the spray combustion process of an OME3−5 mixture and n-dodecane with advanced optical diagnostics, Reynolds-Averaged Navier–Stokes (RANS), and Large-Eddy Simulations (LESs) within a constant-volume vessel. Cool-flame and high-temperature combustion were measured simultaneously via high-speed (50 kHz) imaging with formaldehyde (CH2O) planar laser-induced fluorescence (PLIF) representing the former and line-of-sight OH* chemiluminescence the latter. Both RANS and LES simulations accurately describe the cool-flame development process with the formation of CH2O. However, CH2O consumption and the onset of high-temperature reactions, signaled by the rise of OH* levels, show significant deviations between RANS, LES, and experiments as well as between n-dodecane and OME. A focus is set on the quality of the simulated results compared to the experimentally observed spatial distribution of OH*, especially in OME fuel-rich regions. The influence of the turbulence modeling is investigated for the two distinct ambient temperatures of 900 K and 1200 K within the Engine Combustion Network Spray A setup. The capabilities and limitations of the RANS simulations are demonstrated with the initial cool-flame propagation and periodic oscillations of CH2O formation/consumption during the quasi-steady combustion period captured by the LES.

Particle formation in oxymethylene ethers (OMEn, n = 2-4) / ethylene premixed flames

Numerical and experimental investigations on the particle formation in oxymethylene ethers (OME n , n = 2−4)/ethylene premixed flames

Experimental and numerical study on the effect of oxymethylene ether-3 (OME3) on soot particle formation

Role of Dimethyl Ether in Incipient Soot Formation in Premixed Ethylene Flames

Effect of Dimethyl Ether (DME) Addition on Sooting Limits in Counterflow Diffusion Flames of Ethylene at Elevated Pressures

Speciation and the Laminar Burning Velocities of Poly(oxymethylene) Dimethyl Ether 3 (POMDME3) Flames: an Experimental and Modeling Study

Soot and Flame Structures in Turbulent Partially Premixed Jet Flames of Pre-Evaporated Diesel Surrogates with Admixture of OMEn

LES and RANS Spray Combustion Analysis of OME3-5 and n-Dodecane

Isomer-Specific Influences on the Composition of Reaction Intermediates in Dimethyl Ether/Propene and Ethanol/Propene Flame

An optical investigation of Fischer-Tropsch diesel and Oxymethylene dimethyl ether impact on combustion process for CI engines

Cross-effect considered skeletal chemical mechanism construction for primary reference fuel/oxymethylene ethers blends using radical trace and sensitivity analysis

Effects of polyoxymethylene dimethyl ethers (PODEn) on soot characteristics in isooctane inverse diffusion flames

Formation of Nascent Soot During Very Fuel-Rich Oxidation of Ethylene at Low Temperatures

Incipient sooting tendency of oxygenated fuels doped in ethylene counterflow diffusion flames

A conceptual model of polyoxymethylene dimethyl ether 3 (PODE 3 ) spray combustion under compression ignition engine-like conditions

Numerical study on the temperature dependence of soot formation in acetylene pyrolysis blended with methane, formaldehyde, methanol, and dimethyl ether

Experimental Study of Dimethoxymethane and Dimethyl Carbonate Addition to Premixed Ethane / Oxygen / Argon Flame

Studies on Polyoxymethylene Dimethyl Ethers Production from Dimethoxymethane and 1,3,5-Trioxane over SO42-/ZrO2-TiO…

Combustion Study of Polyoxymethylene Dimethyl Ethers and Diesel Blend Fuels on an Optical Engine

Formation of soot particles in methane and ethylene combustion: A reactive molecular dynamics study

Potential of the Synthetic Fuel Oxymethylene Ether (OME) for the Usage in a Single-Cylinder Non-Road Diesel Engine: Thermodynamics and Emissions