Abstract:In this work, the Nusselt number is examined for periodically developed heat transfer in micro- and mini-channels with arrays of offset strip fins, subject to a constant heat flux. The Nusselt number is defined on the basis of a heat transfer coefficient which represents the spatially constant macro-scale temperature difference between the fluid and solid during conjugate heat transfer. Its values are determined numerically on a single unit cell of the array for Reynolds numbers between 1 and 600. Two combinations of the Prandtl number and the thermal conductivity ratio are selected, corresponding to air and water. It is shown that the Nusselt number correlations from the literature mainly apply to air in the transitional flow regime in larger conventional channels if the wall temperature remains uniform. As a result, they do not correctly capture the observed trends for the Nusselt number in micro- and mini-channels subject to a constant heat flux. Therefore, new Nusselt number correlations, obtained through a least-squares fitting of 2282 numerical simulations, are presented for air and water. The suitability of these correlations is assessed via the Bayesian approach for parameter estimation and model validation. The correlations respect the observed asymptotic trends and limits of the Nusselt number for all the geometrical parameters of the offset strip fins. In addition, they predict a linear dependence of the Nusselt number on the Reynolds number, in good agreement with the data from this work. Nevertheless, a detailed analysis reveals a more complex scaling of the Nusselt number with the Reynolds number, closely related to the underlying flow regimes, particularly the weak and strong inertia regimes. Finally, through 62 additional simulations, the influence of the material properties on the Nusselt number is illustrated and compared to the available literature.

What problem does this paper attempt to address?

This paper aims to solve the Nusselt number problem in the steady - state periodic heat transfer process with staggered fin - strip arrays in micro - channels and mini - channels. Specifically, the research object is the heat transfer characteristics in these channels under the condition of constant heat flux. The following are the main objectives and background of the paper: ### Research Background 1. **Application Requirements**: With the increasing demand for high - power - density heat transfer devices, micro - channels and mini - channels are becoming more and more important in many applications, such as the cooling of micro - electronic systems, heat recuperators in small gas turbines, heat exchangers in refrigeration and liquefaction systems, and solar air heaters. 2. **Heat Transfer Mechanism**: The flow in these channels is usually stable laminar flow, especially when the fin height - to - length ratio is below 1 and the Reynolds number ranges from 10 to 500. 3. **Limitations of Existing Research**: Existing Nusselt number - related research mainly focuses on conventional channels, using air as the working medium and assuming uniform wall temperature. These studies are not applicable to the heat transfer situation in micro - channels and mini - channels under the condition of constant heat flux. ### Research Problems 1. **Nusselt Number Correlation**: Existing Nusselt number correlations are mainly applicable to the transitional and turbulent flow conditions of air in conventional channels. The applicability of these correlations in micro - channels and mini - channels is limited, especially under the condition of constant heat flux. 2. **Effect of Conjugate Heat Transfer**: In micro - channels and mini - channels, the conjugate heat transfer between the fluid and the solid has a significant impact on the Nusselt number, which may be ignored in the existing literature. 3. **Effect of Material Properties**: The influence of the thermophysical properties (such as thermal conductivity) of different materials on the Nusselt number needs further study. ### Research Methods 1. **Numerical Simulation**: Through numerical simulation, study the influence of different geometric parameters (such as the fin height - to - length ratio) on the Nusselt number in the Reynolds number range from 1 to 600. 2. **Data Fitting**: Based on the results of 2282 numerical simulations, fit new Nusselt number correlations by the least - squares method. 3. **Bayesian Verification**: Use the Bayesian method for parameter estimation and model verification to ensure the accuracy and reliability of the new correlations. ### Main Contributions 1. **New Nusselt Number Correlations**: Propose new Nusselt number correlations applicable to air and water, which can better describe the heat transfer characteristics in micro - channels and mini - channels under the condition of constant heat flux. 2. **Analysis of Complex Flow Mechanisms**: Analyze in detail the complex relationship between the Nusselt number and the Reynolds number, especially the influence of weak - inertia and strong - inertia flow mechanisms. 3. **Effect of Material Properties**: Through an additional 62 simulations, explore the influence of material properties on the Nusselt number and compare it with the existing literature. ### Conclusion This research fills the gap in Nusselt number correlations in micro - channels and mini - channels under the condition of constant heat flux, providing an important theoretical basis for the design and optimization of these channels.

Nusselt number for steady periodically developed heat transfer in micro- and mini-channels with arrays of offset strip fins subject to a uniform heat flux

Detailed Heat Transfer Measurements of Curved Fin Channels

Developed and quasi-developed macro-scale heat transfer in micro- and mini-channels with arrays of offset strip fins subject to a uniform heat flux

Fluid Flow and Heat Transfer Performance in a Micro-Reactor with Non-Uniform Micro-Pin-fin Arrays for Hydrogen Production at Low Reynolds Number

Numerical study of the intensification of single-phase heat transfer in a sandwich-like channel using staggered miniature-pin fins

On the Correct Nusselt Numbers for Laminar Fully Developed Flow in a Plane Channel with Isothermal Walls

Correlating convection heat transfer for Falkner-Skan flow

Heat and mass transfer characteristics in reforming micro-reactor with micro-pin-fin arrays

Asymptotic Nusselt numbers for internal flow in the Cassie state

Experimental and numerical study of mixed convection heat transfer in a vented cavity partially filled with a porous medium: Effects of reynolds and rayleigh numbers on Nusselt number and flow regimes

An Experimental Study Of Transitional Flow Friction And Heat Transfer Performance Of A Channel With Staggered Arrays Of Mini-Scale Short Pin Fins

Flow and Heat Transfer Performance of a Mini-Channel Radiator with Cylinder Disturbed Flow

A numerical study of laminar convective heat transfer in microchannel with non-circular cross-section☆

Simultaneously developing flow and heat transfer in circular and parallel-plates microchannels with velocity slip and temperature jump

Experimental Study of Single-Phase Pressure Drop and Heat Transfer in a Micro-Fin Tube

Thermal properties measurement and performance evaluation of water/ZnO nanofluid in a mini channel with offset fins

Analytical Determination of Nusselt Numbers for Convective Heat Transfer Coefficients in Channel Macroporous Absorbers

Numerical study of the influence of pin fin arrangement and volume fraction on the heat transfer and fluid flow phenomena within open microchannels

Forced Heat Convection of Wavy Fin Channel

Numerical investigation of thermal performance augmentation of nanofluid flow in microchannel heat sinks by using of novel nozzle structure: sinusoidal cavities and rectangular ribs

Fully Non-Dimensional Nusselt Number Correlation for Transient Natural Convection in Tanks