Abstract:This research explores the intricacies of oxygen exchange kinetics in Pr4Ni3O10+δ (PNO), aiming to assess its potential as a viable cathode material for solid oxide fuel cell applications. Utilizing a multifaceted approach, advanced techniques such as electrical conductivity relaxation, pulse isotopic exchange, and oxygen permeation are employed. A comparative analysis with other promising cathode materials, specifically La0.6Sr0.4Co0.2Fe0.8O3-δ (LSCF6428), reveals PNO superior performance. At 650 °C, PNO demonstrates an order of magnitude higher chemical diffusion exchange coefficient, Dchem, than LSCF6428, and its surface exchange coefficient, kchem, surpasses LSCF6428 by one and a half orders of magnitude. Long-term stability assessment through 1000 h electrical conductivity relaxation testing at 700 °C confirms PNO consistent performance. Oxygen permeation studies reveal an inverse correlation between membrane thickness and permeation rate. Notably, PNO demonstrates an impressive two-fold higher oxygen flux compared to LSCF6428. Furthermore, PNO maintains stable oxygen permeation over 1000 h at 700 °C, contrasting with an observed 11% degradation in LSCF6428. X-ray diffraction and scanning electron microscopy analyses corroborate PNO stability, while secondary phase formation observed in LSCF6428 contributes to its degradation. The pulse isotopic exchange measurements conducted on the fractionated powder of PNO within the temperature range of 350-450 °C provide valuable insights into the surface exchange mechanism. These measurements reveal that at highest oxygen partial pressure (pO2) values covered by the experiments, the relative rates of dissociative adsorption, Rads, and oxygen incorporation, Rinc, engage in competitive oxygen exchange dynamics. Conversely, at the lower pO2 values, oxygen exchange is predominantly limited by Rads.

An environmental friendly plasma oxynitrocarburising technology with excellent performances

Surface properties of low alloy steel treated by plasma nitrocarburizing prior to laser quenching process

Structure and Wear Performance of a Titanium Alloy by Using Low-Temperature Plasma Oxy-Nitriding

Nitrogen–carbon-induced Spinodal Structure in Plasma Nitrocarburized 38crmoal with Hollow Cathode Discharging

Effect of nitrogen protective atmosphere on microstructure and property of nanocomposite coating

Plasma nitrided 65Mn steel: Microstructure, tribocorrosion and electrochemical properties and DFT calculation

Optimization for Plasma-facilitated Catalytic Reduction of NO_x

Tribological Properties of the Modified Layers Prepared on 38crmoal Steel by Plasma Nitrocarburized and Post-Sulfurized Method

Structural and Tribological Properties of Sulfonitrocarburizing Layers Prepared by Plasma Nitrocarburizing and Low Temperature Ion Sulfurizing

Kinetics analysis and enhancement mechanism of aluminum-enhanced plasma nitriding for 42CrMo steel

Aluminum-Modified Plasma Nitriding with High Efficiency and Enhanced Performance

A study on the mechanical performance and medium temperature tribological behavior of plasma nitrocarburizing/TiAlSiN/DLC composite coating

Plasma Nitriding of AISI 304 Stainless Steel in Cathodic and Floating Electric Potential: Influence on Morphology, Chemical Characteristics and Tribological Behavior

Improved tribological behaviour of super duplex stainless steel through plasma nitriding at ultra-low temperature without prior polishing

Plasma-assisted defect engineering of N-doped NiCo 2 O 4 for efficient oxygen reduction

Mechanical and Wear Properties of 42CrMo Steel by Plasma Nitriding assisted Hollow Cathode Ion Source

Controllable fabrication of Co-CoO architecture: morphology, defects and metal components toward efficient degradation of organic pollutants

Plasma synthesis of oxygen vacancy-rich CuO/Cu2(OH)3NO3 heterostructure nanosheets for boosting degradation performance

One-step fabrication of double-layer nanocomposite coating by plasma electrolytic oxidation with particle addition

Enhanced oxygen exchange kinetics and long-term stability of Ruddlesden-Popper phase Pr4Ni3O10+δ cathode for solid oxide fuel cells

Solutions to improve surface hardness of stainless steels without loss of corrosion resistance