Abstract:The possibility of reusing ceramic roller waste to produce cordierite and mullite refractories was investigated. Five batches were designed using wastes representing ceramic roller waste, magnesite, and silica sand, shaped and fired at 1300 °C/2 h, and one batch was selected at 1200 °C. The chemical composition and precipitated phases of the used raw materials and the fired batches were analyzed using XRF and XRD techniques, respectively. Densification parameters, morphology, microstructure and electrical properties were also studied to evaluate the effect of the formed phases on the properties of fired materials. Bulk density increases with an increase in mullite and a decrease in cordierite, and it also increases with increasing temperature, whereas porosity and water absorption show a opposite behavior to density (it decreases with an increase in mullite and temperature). The main phases developed after firing at 1300 °C/2 h were cordierite, mullite, corundum, baddeleyite, and spinel. Bending strength increases with increasing mullite percentage and density, and decreasing grain size and porosity. The microstructure develops and becomes finer with increasing mullite percentage and density. The grain size of the crystals was very fine at 1200 °C/2 h and increased at 1300 °C/2 h. Broadband dielectric spectroscopy was employed to study the electrical and dielectric behavior of the investigated samples. The increase in mullite concentration shows a remarkable increase in ε', especially at lower frequencies, as it is three times higher than that of M10. At f > 103 Hz ε', frequency independence is accompanied by an increase in mullite concentrations due to the lag of dynamics fluctuations after the alteration of the electric field. The generation of new free ions leads to the enhancement of conductivity as the mullite concentration increases.

Waste to shield: Tailoring cordierite/mullite/zircon composites for radiation protection through controlled sintering and Y 2 O 3 modification

Impacts of sintering temperature on the mechanical properties and gamma ray protection capacity of clay bricks

Process Development of Zirconolite Ceramics for Pu Disposition: Use of a CuO Sintering Aid

Effect of Gd2o3 Addition on Mechanical, Thermal and Shielding Properties of Al2o3 Ceramics

The influence of zirconium dioxide nanoadditives on the properties of mullite-corundum

Synthesis and characterization of ceramic refractories based on industrial wastes

Ceramic Mineral Waste-Forms for Nuclear Waste Immobilization

Effects of Y₂O₃ Additive on Mechanical and Thermal Properties of Cordierite-Mullite Ceramics

Mullite–zirconia composite for the bonding phase of refractory bricks in hazardous waste incineration rotary kiln

Reuse of spent FCC catalyst, waste serpentine and kiln rollers waste for synthesis of cordierite and cordierite-mullite ceramics

Influence of sustainable waste granite, marble and nano-alumina additives on ordinary concretes: a physical, structural, and radiological study

Effects of partial substitution of calcium alumino-titanate on the properties and microstructure of mullite–cordierite composites

Synthesis and characterization of waste polyethylene/Bi2O3 composites reinforced with CuO/ZnO nanoparticles as sustainable radiation shielding materials

Preparation and densification study of sodium zirconium phosphate-doped microwave-sintered uranium tailing ceramics

Chemical durability and shielding study of borosilicate glass systems from solid municipal waste ash for radiation shielding applications

Effect Of Alumina-Based Fiber On The Mid-Temperature Strength Of Integral Ceramic Mold For Casting Hollow Turbine Blade

Fabrication, sintering behavior and mechanical properties of calcium oxide doped yttrium oxide refractory via aqueous gel casting method

Utilizing a one-step hydrothermal method for fabrication and evaluation of radiation shielding characteristics in Pb(ZrO3)-doped zirconia: synthesis and characterization

Evaluating the Effects of Metallic Waste on the Structural and Gamma-Ray Shielding Properties of Epoxy Composites

Electromagnetic Shielding Enhancement in Cement Composites: A Comparative Study of Mechanically and Thermally Recycled Carbon Fibers

An experimental study on gamma radiation attenuation effectiveness of magnetite and serpentine doped ceramics