Abstract:Despite the known impacts on climate change of carbon dioxide emissions, the continued use of fossil fuels for energy generation leading to the emission of carbon dioxide (CO2) into the atmosphere is evident. Therefore, innovation to address and reduce CO2 emissions from industrial operations remains an urgent and crucial priority. A viable strategy in the area is postcombustion capture mainly through absorption by aqueous alkanolamines, which focuses on the separation of CO2 from flue gas, despite its limitations. Within this context, porous materials, particularly metal-organic frameworks (MOFs), have arisen as favorable alternatives owing to their significant adsorption capacity, selectivity, and reduced regeneration energy demands. This research evaluates the engineering insights into tailored MOFs for enhanced CO2 capture, focusing on three series of MOFs (ZIF, UiO-66, and BTC) to investigate the effects of organic ligands, functional groups, and metal ions. The evaluation encompassed a range of aspects including adsorption isotherms of pure gases [CO2 and nitrogen (N2)] and mixed gas mixture (CO2 and N2 with 15:85% ratio), along with utilization of the ideal adsorbed solution theory (IAST) to simulate multicomponent gas adsorption isotherms. Moreover, the reliability of IAST for mixed gas adsorption prediction has been investigated in detail. The research offers valuable insights into the correlation between the characteristics of MOFs and their effectiveness in gas separation and how these characteristics contribute to the differences between IAST predictions and experimental results. The findings enhance the understanding of how to enhance MOF characteristics in order to reduce CO2 emissions and also highlight the need for advanced models that consider thermodynamic nonidealities to accurately predict the behavior of mixed gas adsorption in MOFs. As a result, the incorporation of MOFs with enhanced predictability and reliability into CO2 capture industrial processes is facilitated.

Liquid‐Metal‐Enabled Mechanical‐Energy‐Induced CO 2 Conversion

Low‐Temperature CO2 Reduction using Mg–Ga Liquid Metal Interface

Integrated and Automated: Liquid Metal‐based System for Full Cycle CO2‐to‐Carbon Conversion (Adv. Energy Mater. 26/2024)

Spontaneous Phase Transition and Multistage Interfacial Mechanical Friction of Liquid Metals Induced CO2 Reduction at Room Temperature

Liquid Metal with Solvents for CO2 Capture

Low Temperature Nano Mechano-electrocatalytic CH 4 Conversion

An Integrated Carbon Dioxide Capture and Methanation Process

CO2 electroreduction to multicarbon products from carbonate capture liquid

Harnessing the Hybridization of a Metal-Organic Framework and Superbase-Derived Ionic Liquid for High-Performance Direct Air Capture of CO2.

Heterojunction-redox Catalysts of FexCoyMg10CaO for High-Temperature CO2 Capture and in Situ Conversion in the Context of Green Manufacturing

Continuous Gas-to-Liquid Conversion for Carbon-Efficient Electroreduction of CO2

Renewable cycle for CO 2 decomposing by liquid metals at ambient conditions

Engineering Insights into Tailored Metal-Organic Frameworks for CO2 Capture in Industrial Processes

Coupling electrochemical CO2 conversion with CO2 capture

Reactive capture of CO2 via amino acid

Direct and continuous conversion of flue gas CO2 into green fuels using dual function materials in a circulating fluidized bed system

CO2 capture and reduction to liquid fuels in a novel electrochemical setup by using metal-doped conjugated microporous polymers

Direct Air Capture and Integrated Conversion of Carbon Dioxide into Cyclic Carbonates with Basic Organic Salts

Integrated Capture and Conversion of CO2 to Methane using a Water-lean, Post-Combustion CO2 Capture Solvent.

Efficient molten salt CO2 capture and selective electrochemical transformation processes toward carbon neutrality: advances, challenges, and prospects

Harnessing the Hybridization of a Metal‐Organic Framework and Superbase‐Derived Ionic Liquid for High‐Performance Direct Air Capture of CO2 (Small 41/2023)