Abstract:Using ascorbic acid as a reducing agent, AgNO3 as silver salts and polyethylene glycol 4000(PEG-4000) as dispersant, sub-micron spherical silver powders were prepared by a liquid-phase reduction method. By means of the orthogonal design of three factors and three levels, the effects of the following factors on the particles size of silver powders were studied, including the concentration of ascorbic acid, the way of dispersant addition into solution and the pH value of the solution. The optimized preparation conditions of sub-micron spherical silver powders were obtained. The sub-micron spherical silver powders could be synthesized under the conditions of pH=5, AgNO3 concentration of 0.5 mol/L, adding half of the dispersant to the AgNO3 and ascorbic acid solution, C6H8O6 concentration of 0.9 mol/L, PEG-4000/AgNO3 mass ratio of 1.2 and at room temperature. The sub-micron spherical silver powders were characterized by laser particle distribution analyzer, SEM and XRD. The results show that the prepared silver powders are pure, with uniform particle size distribution and spherical shape under optimized experiment conditions. The paste prepared with the obtained silver powders was printed on the silicon, and the square resistance of the sintered film is 0.721 m Omega/square, indicating the electrical property of the prepared silver is qualified for solar cells.

Preparation and representation of nanometer silver iodide catalyst for artificial weather modification

Seed-mediated synthesis of silver nanocrystals with controlled sizes and shapes in droplet microreactors separated by air.

Preparation and Microstructure of Silver Nanopowder with Spheric Morphology

In situ synthesis of AgI on the nanosilica surface for potential application as a cloud seeding material

Preparation and Characterization of Silver Powders with Spheric Shape and Different Sizes

Critical Size of Silver Iodide Containing Glaciogenic Cloud Seeding Particles

Morphology and Composition Controlled Synthesis of Flower-Like Silver Nanostructures.

Synthesis of Silver Nanocubes and Factors Affecting the Size and Shape of Sliver Nanoporticles

Thermoresponsive Polymer-Stabilized Silver Nanoparticles

Preparation of Silver Nanoshells on Silica Particles by a Simple Two-step Process

Formation of Silver Nano Particles in Percolative Ag‐PbTiO 3 Composite Dielectric Thin Film

Preparation and Characterization of Silver Coated Hollow SnO2 Sphere with Open Structure

Synthesis of nanosized silver particles by chemical reduction method

Preparation of nanocrystalline silver by the method of liquid-solid arc discharge combined with hydrothermal treatment

Study on the Preparation of Spherical Nanosilver Particles Using Ammonium Citrate and Polyvinyl Alcohol as Surfactants

Polymer Driven Covalently Bonded Decahedral-Twinning of Ag Nanoparticles Prepared by Icp Enhanced Magnetron Sputtering Method

Formation of Nanostructured Emitter for Silicon Solar Cells Using Catalytic Silver Nanoparticles

Nanocrystalline Silver Particles: Synthesis, Agglomeration, and Sputtering Induced by Electron Beam.

Seedless and electroless plating of silver on silica particles by using microreactor

Preparation of Spherical Ultrafine Silver Particles Using Y-Type Microjet Reactor

Preparation of Sub-micron Spherical Silver Powders for Solar Cell Paste