Abstract:Studying transitions from laminar to turbulence of non-Newtonian fluids can provide a theoretical basis to further mediate their dynamic properties. Compared with Newtonian fluids, transitions of non-Newtonian fluids turning are less focused, thus being lack of good predictions of the critical Reynolds number (Re) corresponding to the first Hopf bifurcation. In this study, we employ the lattice Boltzmann method as the core solver to simulate two-dimensional lid-driven flows of a typical non-Newtonian fluid modeled by the power rheology law. Results show that the critical Re of shear-thinning (5496) and shear-thickening fluids (11546) are distinct from that of Newtonian fluids (7835). Moreover, when Re is slightly larger than the critical one, temporal variations of velocity components at the monitor point all show a periodic trend. Before transition of the flow filed, the velocity components show a horizontal straight line, and after transition, the velocity components fluctuate greatly and irregularly. Through fast Fourier transform for the velocity components, it is noted that the velocity has a dominant frequency and a harmonic frequency when Re is marginally larger than the critical one. Besides, the velocity is steady before transition of flow filed, so it appears as a point on the frequency spectrum. As the flow filed turns to be turbulent, the frequency spectrum of the velocity component appears multispectral. Different from a single point in the velocity phase diagram before transition, the velocity phase diagram after transition forms a smooth and closed curve, whose area is also increasing as Re increases. The center point of the curve moves along a certain direction, while movement directions of different center points are different. Proper orthogonal decompositions for the velocity and vorticity field reveal that the first two modes, in all types of fluids, are the dominant modes when Re is close to the critical one, with energy, occupying more than 95% the whole energy. In addition, for one type of fluid, the dominant modes at different Re values have similar structures. Results of the first and second modes of velocity field show that the modal peak is mainly distributed in vicinity of the cavity wall.

Oblique transition in hypersonic double-wedge flow

Direct Numerical Simulations of First-Mode Oblique Breakdown in a Supersonic Boundary Layer under Wall Transpiration

Direct Numerical Simulation of Oblique-Wave Transition in Concave Boundary Layer

Gap-induced Transition Via Oblique Breakdown at Mach 6

Boundary layer transition of hypersonic flow over a delta wing

Oblique-mode Breakdown in Hypersonic and High-Enthalpy Boundary Layers over a Blunt Cone

Transitions of Power-Law Fluids in Two-Dimensional Lid-Driven Cavity Flow Using Lattice Boltzmann Method

Mixed mode transition in boundary layers: Helical instability

Direct numerical simulation of complete transition to turbulence via first- and second-mode oblique breakdown at a high-speed boundary layer

Interactions Between Oblique Second Mode and Oblique Waves in a High-Speed Boundary Layer

The Evolution of Second Harmonic Waves in Oblique Transition

Heat Transfer and Behavior of the Reynolds Stress in Mach 6 Boundary Layer Transition Induced by First-Mode Oblique Waves

Transition in Hypersonic Boundary Layers: Role of Dilatational Waves

Triadic Resonance Analysis of Distributed Roughness Effects on Crossflow Instability in Swept-Wing Boundary Layers

Hypersonic Boundary Layer Transition and Heat Loading

Direct numerical simulation of roughness-induced transition controlled by two-dimensional wall blowing

Controlling Second-Mode Oblique Breakdown in High-Speed Boundary Layers Using Streak: A Direct Numerical Simulation Study

Transition Induced by Wall-Normal Vibration in Flow Around a Flat Plate with Roughness

Modelling Flow Transition in a Hypersonic Boundary Layer with Reynolds-averaged Navier-Stokes Approach

Secondary Instability of Crossflow Vortices and Swept-Wing Boundary-Layer Transition