Abstract:Cross-flow transition over a delta wing is systematically studied in a Mach 6.5 hypersonic wind tunnel, employing the Rayleigh scattering flow visualisation, high-speed schlieren and fast-response pressure sensors. Direct numerical simulations and analysis based on linear stability theory under the same flow conditions are applied to analyse the transition mechanism. Three unstable modes are identified: the travelling cross-flow instabilities, the second mode and the low-frequency waves. It is shown that the travelling cross-flow vortices first appear in the cross-flow region near the leading edge of the model. These vortices can modulate the mean profile of the flow, which benefits the growth of second mode. A phase-locked interaction mechanism transfers energy from the cross-flow instabilities to the high-frequency second mode, leading to amplification at the expense of the cross-flow instability. As the second mode grows to a critical amplitude, it triggers a -type secondary instability within a similar frequency range, which introduces secondary finger-like structures connecting to the cross-flow vortex. It is further found that the generation of these finger-like structures is related to the expansion and compression of the second mode. These finger vortices further evolve along the streamwise direction into low-frequency waves and corresponding hairpin-like structures that finally trigger turbulence. An interaction mechanism likely exists between the secondary instability and the low-frequency waves, since their phase speeds are approaching each other. These observations of the interaction mechanism are consistent with those of previous studies on hypersonic boundary layers (Zhang et al., Phys. Fluids, vol. 32 (7), 2020, 071702; Li et al., Phys. Fluids, vol. 32 (5), 2020, 051701).

Transition in Hypersonic Boundary Layers: Role of Dilatational Waves

Boundary layer transition of hypersonic flow over a delta wing

Aerodynamic Heating in Transitional Hypersonic Boundary Layers: Role of Second-Mode Instability

Direct Numerical Simulations of First-Mode Oblique Breakdown in a Supersonic Boundary Layer under Wall Transpiration

Effects of Wall Transpiration on the Supersonic Boundary-Layer Oblique-Type Transition

Aerodynamic Heating in Hypersonic Boundary Layer: Role of Dilatational Waves

Aerodynamic Heating in Hypersonic Boundary Layers:\ Role of Dilatational Waves

Effect of Reynolds number on second-mode waves in transitional hypersonic boundary layers

Roughness-Induced Transition in Supersonic Boundary Layers with Wall Heating and Cooling Effects

Direct Numerical Simulation of Hypersonic Transition Induced by an Isolated Cylindrical Roughness Element

Experimental Investigation on Forced Boundary-Layer Transition in Shock Tunnel

Active Transition Control by Synthetic Jets in a Hypersonic Boundary Layer

Gap-induced Transition Via Oblique Breakdown at Mach 6

Oblique transition in hypersonic double-wedge flow

Transition Induced by Wall-Normal Vibration in Flow Around a Flat Plate with Roughness

Modeling Of Supersonic/Hypersonic Boundary Layer Transition Using A Single-Point Approach

Transition Triggered by Isolated Roughness Element Using Improved Delayed Detached Eddy Simulation Model

Evolution of Supersonic Modes in Hypersonic High-Enthalpy Boundary Layer Transition

Experimental study of the effects of isolated roughness elements on the stability and transition of a hypersonic boundary layer on a flat plate

Hypersonic Transition Induced by Three Isolated Roughness Elements on a Flat Plate

Direct numerical simulation of hypersonic transition induced by a cylindrical roughness element