Abstract:Instability evolution in a transitional hypersonic boundary layer and its effects on aerodynamic heating are investigated over a 260 mm long flared cone. Experiments are conducted in a Mach 6 wind tunnel using Rayleigh-scattering flow visualization, fast-response pressure sensors, fluorescent temperature-sensitive paint (TSP) and particle image velocimetry (PIV). Calculations are also performed based on both the parabolized stability equations (PSE) and direct numerical simulations (DNS). Four unit Reynolds numbers are studied, 5.4, 7.6, 9.7 and$11.7\times 10^{6}~\text{m}^{-1}$. It is found that there exist two peaks of surface-temperature rise along the streamwise direction of the model. The first one (denoted as HS) is at the region where the second-mode instability reaches its maximum value. The second one (denoted as HT) is at the region where the transition is completed. Increasing the unit Reynolds number promotes the second-mode dissipation but increases the strength of local aerodynamic heating at HS. Furthermore, the heat generation rates induced by the dilatation and shear processes (respectively denoted as$w_{\unicode[STIX]{x1D703}}$and$w_{\unicode[STIX]{x1D714}}$) were investigated. The former item includes both the pressure work$w_{\unicode[STIX]{x1D703}1}$and dilatational viscous dissipation$w_{\unicode[STIX]{x1D703}2}$. The aerodynamic heating in HS mainly arose from the high-frequency compression and expansion of fluid accompanying the second mode. The dilatation heating, especially$w_{\unicode[STIX]{x1D703}1}$, was more than five times its shear counterpart. In a limited region, the underestimated$w_{\unicode[STIX]{x1D703}2}$was also larger than$w_{\unicode[STIX]{x1D714}}$. As the second-mode waves decay downstream, the low-frequency waves continue to grow, with the consequent shear-induced heating increasing. The latter brings about a second, weaker growth of surface-temperature HT. A theoretical analysis is provided to interpret the temperature distribution resulting from the aerodynamic heating.

Aerodynamic Heating in Hypersonic Boundary Layer: Role of Dilatational Waves

Aerodynamic Heating in Hypersonic Boundary Layers:\ Role of Dilatational Waves

Aerodynamic Heating in Transitional Hypersonic Boundary Layers: Role of Second-Mode Instability

Newly Identified Principle for Aerodynamic Heating in Hypersonic Flows

Shock-induced heating and transition to turbulence in a hypersonic boundary layer

Transition in Hypersonic Boundary Layers: Role of Dilatational Waves

Turbulent heat flux and wall heat transfer in hypersonic turbulent boundary layers with wall disturbances

Effects of Temperature on Drag Reduction in a Subsonic Turbulent Boundary Layer Via Micro-Blowing Array

Boundary layer transition of hypersonic flow over a delta wing

Energy Transfer of Hypersonic and High-Enthalpy Boundary Layer Instabilities and Transition

An Effective Control Strategy for Transitional Hypersonic Boundary Layers

Research on Hypersonic Boundary-Layer Stability with High-Temperature Effects

Secondary Instability of the Hypersonic High-Enthalpy Boundary Layers with Thermal–chemical Nonequilibrium Effects

Parabolized Stability Analysis of Hypersonic Thermal–Chemical Nonequilibrium Boundary-Layer Flows

Hypersonic Boundary Layer Transition and Heat Loading

Roughness-Induced Transition in Supersonic Boundary Layers with Wall Heating and Cooling Effects

Role of Freestream Slow Acoustic Waves in a Hypersonic Three-Dimensional Boundary Layer

Adjoint-based linear sensitivity of a hypersonic boundary layer to steady wall blowing-suction/heating-cooling

Cross-flow Vortices and Their Secondary Instabilities in Hypersonic and High-Enthalpy Boundary Layers

Three-dimensional wall heating elements effect on the instability in zero pressure gradient supersonic boundary layers

Effect Of Wall Temperature On Hypersonic Turbulent Boundary Layer