Abstract:Building Integrated Photovoltaic systems can produce a significant portion of the energy demand of urban areas. Despite their potential, they remain a niche technology that architects and project engineers still find esthetically limited. The dark blue or black color of standard photovoltaic panels is considered inappropriate for restoration projects of historic buildings and represents a major constraint on the development of new projects. This work will provide insight into how the use of optic filters can offer new pathways for architectural acceptance of photovoltaic panels. Optic filters selectively reflect or transmit light by interference and can be designed and fabricated using cost‐effective and industrially compatible processes. By using in‐house developed ray tracing software coupled with TCAD Sentaurus, more than 400 colors were obtained, and their impact on the opto‐electrical performance of interdigitated back‐contacted solar cells was studied. Results show a maximum efficiency loss of 1.6% absolute at the perpendicular incidence of light on the range of obtained colors when compared with a standard dark blue solar cell. Simulations for different angles of incidence showed that the current reduction on the standard device could be modeled using a cosine relationship. The colored cells, however, deviated significantly from this relationship. We propose that the angular behavior of any cell (colored or standard) could be simulated by modifying the effective irradiance with scaling factors equal to the ratios of the photogenerated current at any angle with respect to the value at normal incidence. We demonstrate that this approach accurately models the effect of the color filter and allows for an easy transition from a bare cell to an encapsulated one. Due to the spectral effect of the filter, we developed both a spectrally resolved optical model and a two‐dimensional finite volume transient thermal model. In case of the optical model, we demonstrate an accuracy in the prediction of the reflectance produced by the color with values of mean bias error (MBE) between 2.0% and 3.9%. As for the thermal model, it was validated by first analyzing a standard model under conditions of nominal operating cell temperature and then comparing its results with published scientific literature. Later, we compare its prediction against 2 weeks of measurements. In both cases the thermal model proves an adequate accuracy, yielding differences below 1.5°C with respect to other scientific works and an MBE value of 0.89°C as well as a root‐mean‐square error value of 2.10°C for the entire measurement period. With the validated models, we studied the effect of the encapsulation on the color perception. We present two options of color filters. The first one produces relatively low reflectance losses and presents relative annual direct current (DC) energy losses of up to 6.4% for Delft, in the Netherlands, and up to 5.9% for Alice Springs in Australia. However, this first option has very poor color brightness. The second studied filter produces highly saturated bright colors. Improving brightness can increase the annual DC relative losses up to 13.7% and 13.5% for Delft and Alice Springs, respectively. Overall, we demonstrate that colored filters based on multilayer optical stacks are a versatile option for coloring cells that allow a good compromise between esthetics and performance. We present a modeling framework for performance assessment of colored solar cells. Sentaurus TCAD simulations showed that application of optic filters to produce colored interdigitated back‐contacted (IBC) solar cells produces relatively low impact on efficiency. In‐house developed ray tracing software was used to study the behavior of colored cells. The proposed methods demonstrate that cell to system modeling is possible using scaling factors and the two‐diode model. Simulations show that colors can produce relative annual yield losses ranging from 2% to 11%.

Float, borosilicate and tellurites as cover glasses in Si photovoltaics: optical properties and performances under sunlight

Glassy materials for Silicon-based solar panels: present and future

Mechanically Robust and Self-Cleaning Antireflective Coatings for Photovoltaic Modules

The Micro-Optic Photovoltaic Behavior of Solar Cell along with Microlens Curved Glass Substrate

Outdoor Performance Analysis of Semitransparent Photovoltaic Windows with Bifacial Cells and Integrated Blinds

Theoretic Guide for Using Photonic Glasses as Colored Covers for Solar Energy Harvesting

Monolithic Perovskite/Silicon Tandems with >28% Efficiency: Role of Silicon‐Surface Texture on Perovskite Properties

Long-term photovoltaic performance of thin-film solar cells with diffractive microlens arrays on glass substrates

A study of superstrate amorphous silicon thin film solar cells and modules on flexible BZO glass

Towards long term sustainability of c-Si solar panels: The environmental benefits of glass sheet recovery

Perspectives of New Alternative Materials to Silicon for the Production of Photovoltaic Solar Cells

Experimental Study on Optical Properties of the Collector

Optical loss of photovoltaic modules under diffuse light

Design of a color neutral non‐patterned photovoltaic window based on luminescent solar concentrator

Enhanced Silicon PV efficiency by solar light spectral modulation via photonically tuned porphyrin‐iron oxide hybrid thin films

Effect of multilayer structure and surface texturing on optical and electric properties of structural colored photovoltaic modules for BIPV applications

Optimal design and experimental test of a solar simulator for solar photovoltaic modules

Colored optic filters on c‐Si IBC solar cells for building integrated photovoltaic applications

Solar spectral management with electrochromic devices including PMMA films doped with biluminescent ionosilicas

Downshifting and antireflective thin films for solar module power enhancement

Amorphous silicon thin‐film solar cells deposited on flexible substrates using different zinc oxide layers