Abstract:The Multi-gap Resistive Plate Chamber (MRPC) is a new type of gas detector developed in recent years. It has excellent time resolution (better than 100 ps) and high efficiency (higher than 95%). This detector has been used to construct large-area time-of-flight (TOF) system in many nuclear and particle physics experiments. However, as a type of gaseous detector, the aging of the gas mixture under long-time exposure to ionizing radiation cannot be neglected. With the increase of accelerator luminosity, impurities in the gas mixture can be potentially dangerous for long-term operation of the MRPC. This has been observed in some experiments, for example with the RHICSTAR muon telescope detector. The CBM-TOF, used for hadron identification, is proposed to be assembled with MRPCs. These counters have to stand particle fluxes as high as 25 kHz/cm(2), and thus the gas pollution is a critical aspect to be studied. In order to better understand the gas quality's impact on the MRPC performance, a twodimensional simulation based on the SIMPLE algorithm is carried out to imitate the distribution of impurities in a MRPC gas box. The preliminary results show that gas pollution grows stronger with the increase of the gas-flowing volume. In addition, we conducted a series of experiments with a 50 x 50 cm(2), 8-gap MRPC prototype. The results match the simulation quite well. Gas pollution indeed has a severe impact on the MRPC performance, and further study can be very useful to reduce gas aging effects in high-luminosity experiments.

The gas flow pattern through a small size Resistive Plate Chamber with 2mm gap

Advances towards a large-area, ultra-low-gas-consumption RPC detector

Performance study of large-area glass resistive plate chambers with different spacer configurations

Towards sealed Resistive Plate Chambers

Gas Magnification Of Multi-Gap Resistive Plate Chamber

A Method to Estimate Gas Magnification of Multi-Gap Resistive Plate Chamber

A Gas Monitoring Chamber for High Pressure Applications

Gas related effects on multi-gap RPC performance in high luminosity experiments

Simulation Study of the Relation Between MRPC Performances and Working Gas

Operation of a low resistivity glass MRPC at high rate using ecological gas

Design of a Gas Monitoring Chamber for High Pressure Applications

Eco-friendly Resistive Plate Chambers for detectors in future HEP applications

Development of novel low-cost gas recirculation system for the RPCs chambers

Exploring Eco-Friendly Gas Mixtures for Resistive Plate Chambers: A Comprehensive Study on Performance and Aging

Performance Testing of a Long-Strip Two-End Readout Multi-Gap Resistive Plate Chamber

Measurements of the Rate Capability of Various Resistive Plate Chambers

The High-Rate Sealed MRPC to Promote Pollutant Exchange in Gas Gaps: Status on the Development and Observations

Development of Hybrid Resistive Plate Chambers

Study on the Position Resolution of Resistive Plate Chamber

Charge Distribution Dependency on Gap Thickness of CMS Endcap RPC

Study on the Performance of Multi-Gap Resistive Plate Chambers