Abstract:With the rapid development and broad applications of unmanned aerial vehicle (UAV)-based wireless stations in the sky, fundamental understanding and characterization of the realistic air-to-ground (A2G) communication link properties are crucial. In this article, a UAV-aided channel sounder with a real-time processing hardware system is developed for highly dynamic and nonstationary A2G channel measurements. In the hardware system, a global positioning system (GPS)-based triggering signal is designed, the equivalent antenna pattern affected by the UAV airframe is considered, and an appropriate sounding signal is selected, to improve the accuracy of measured channel impulse response (CIR). Moreover, real-time hardware processing algorithms for raw channel data, that is, CIR extraction, system response elimination (SRE), power loss recovery (PLR), and adaptive multipath component (MPC) recognition are developed and implemented on a single field-programmable gate array (FPGA) chip. In this way, the required storage size of channel data and the processing time for one slice of CIR is greatly decreased, which can meet the requirement of nonstationary A2G channel measurement with a high sampling rate and long-time measurement. A commercial channel emulator is used to reproduce controllable channels and verify the performance of the developed channel sounder. Finally, the developed channel sounder is applied to carry out A2G measurement campaigns at 3.5 GHz in a campus scenario. The channel characteristics, that is, path loss (PL), -factor, and path angle are analyzed. The measured channel characteristics are consistent with existing measurements under a similar scenario. The estimated path angles are also validated by the theoretical results. Thus, the channel sounder can be used to capture the nonstationary A2G channel characteristics for the system design and algorithm optimization of A2G commun- cations.

An UAV-based Experimental Setup for Propagation Characterization in Urban Environment

Experimental Characterization of Air-to-ground Propagation at mm-Wave Frequencies in Dense Urban Environment

Characterizing the UAV-to-Machine UWB Radio Channel in Smart Factories

An Experimental mmWave Channel Model for UAV-to-UAV Communications

Ultra-Wideband Air-to-Ground Propagation Channel Characterization in an Open Area

Ground-to-UAV sub-Terahertz channel measurement and modeling

Experimental Evaluation of Air-to-Ground VHF Band Communication for UAV Relays

Experiment of Multi-UAV Full-Duplex System Equipped with Directional Antennas

UAV-Assisted Wireless Communications: An Experimental Analysis of A2G and G2A Channels

Evaluating 5G Networks for U-Space Applications: Insights from Dense Urban Measurement Campaign

3D Non-Stationary Channel Measurement and Analysis for MaMIMO-UAV Communications

A UAV-Aided Real-Time Channel Sounder for Highly Dynamic Nonstationary A2G Scenarios

A Survey on Millimeter-Wave Beamforming Enabled UAV Communications and Networking

A Survey of Prototype and Experiment for UAV Communications

A Wireless Channel Sounding System for Rapid Propagation Measurements

UWB Channel Sounding and Modeling for UAV Air-to-Ground Propagation Channels

Unmanned Aerial Vehicle Propagation Channel over Vegetation and Lake Areas: First- and Second-Order Statistical Analysis

Performance Analysis of UAV-based Mixed RF-UWOC Transmission Systems

UAV Communication Channel Measurement, Modeling, and Application

Tutorial on UAV: A Blue Sky View on Wireless Communication

Full-Duplex Aerial Communication System for Multiple UAVs with Directional Antennas