Abstract:With the rapid development and broad applications of unmanned aerial vehicle (UAV)-based wireless stations in the sky, fundamental understanding and characterization of the realistic air-to-ground (A2G) communication link properties are crucial. In this article, a UAV-aided channel sounder with a real-time processing hardware system is developed for highly dynamic and nonstationary A2G channel measurements. In the hardware system, a global positioning system (GPS)-based triggering signal is designed, the equivalent antenna pattern affected by the UAV airframe is considered, and an appropriate sounding signal is selected, to improve the accuracy of measured channel impulse response (CIR). Moreover, real-time hardware processing algorithms for raw channel data, that is, CIR extraction, system response elimination (SRE), power loss recovery (PLR), and adaptive multipath component (MPC) recognition are developed and implemented on a single field-programmable gate array (FPGA) chip. In this way, the required storage size of channel data and the processing time for one slice of CIR is greatly decreased, which can meet the requirement of nonstationary A2G channel measurement with a high sampling rate and long-time measurement. A commercial channel emulator is used to reproduce controllable channels and verify the performance of the developed channel sounder. Finally, the developed channel sounder is applied to carry out A2G measurement campaigns at 3.5 GHz in a campus scenario. The channel characteristics, that is, path loss (PL), -factor, and path angle are analyzed. The measured channel characteristics are consistent with existing measurements under a similar scenario. The estimated path angles are also validated by the theoretical results. Thus, the channel sounder can be used to capture the nonstationary A2G channel characteristics for the system design and algorithm optimization of A2G commun- cations.

UAV-Assisted Wireless Communications: An Experimental Analysis of A2G and G2A Channels

Angular Spread Analysis and Modeling of UAV Air-to-Ground Channels at 3.5 GHz

Wireless Channel Characteristics For Uav-Based Radio Access Networks In Urban Environments

Temporal Correlation Characteristics of Air-to-Ground Wireless Channel with UAV Wobble

Air-to-Ground Wireless Links for High-Speed UAVs.

Ground-to-UAV sub-Terahertz channel measurement and modeling

Towards Connected Unmanned Aerial System: A Channel Modeling Perspective

Tutorial on UAV: A Blue Sky View on Wireless Communication

Impact of UAV 3D Wobbles on the Non-Stationary Air-to-Ground Channels at Sub-6 GHz Bands.

A 3D Air-to-Air Wideband Non-Stationary Channel Model of UAV Communications

A Comprehensive Survey On Uav Communication Channel Modeling

Cellular-Connected UAV: Performance Analysis with 3D Antenna Modelling.

Channel Modeling for UAV Communications: State of the Art, Case Studies, and Future Directions

A UAV-Aided Real-Time Channel Sounder for Highly Dynamic Nonstationary A2G Scenarios

Air-to-Ground Channel Characterization for Low-Height UAVs in Realistic Network Deployments

UAV Communication Channel Measurement, Modeling, and Application

Measurement and Ray-tracing for UAV Air-to-air Channel Modeling

Air-to-Ground Channel Modeling and Performance Analysis for Cellular-Connected UAV Swarm

3D Non-Stationary Wideband UAV-to-Ground MIMO Channel Models Based on Aeronautic Random Mobility Model

Channel Characterization And Simulation For Unmanned Aerial Vehicle Communication

Fixed-Wing UAV Based Air-to-Ground Channel Measurement and Modeling at 2.7ghz in Rural Environment