Abstract:Nanocalorimetry study on 10−40 nm thick Ge2Sb2Te5 (GST) is conducted at a heating rate up to 1,000,000 K s−1 with negligible thermal lag. GST shows Arrhenius crystallization behavior with growth rate (CGV) consistent with that of actual phase‐change memory (PCM) cells. This addresses a 10‐year‐debate originated from the unexpected non‐Arrhenius kinetics measured by commercialized chip‐based calorimetry with CGV 103–105 higher than measured in PCM devices. Non‐volatile phase‐change memory (PCM) devices are based on phase‐change materials such as Ge2Sb2Te5 (GST). PCM requires critically high crystallization growth velocity (CGV) for nanosecond switching speeds, which makes its material‐level kinetics investigation inaccessible for most characterization methods and remains ambiguous. In this work, nanocalorimetry enters this "no‐man's land" with scanning rate up to 1 000 000 K s−1 (fastest heating rate among all reported calorimetric studies on GST) and smaller sample‐size (10–40 nm thick) typical of PCM devices. Viscosity of supercooled liquid GST (inferred from the crystallization kinetic) exhibits Arrhenius behavior up to 290 °C, indicating its low fragility nature and thus a fragile‐to‐strong crossover at ≈410 °C. Thin‐film GST crystallization is found to be a single‐step Arrhenius process dominated by growth of interfacial nuclei with activation energy of 2.36 ± 0.14 eV. Calculated CGV is consistent with that of actual PCM cells. This addresses a 10‐year‐debate originated from the unexpected non‐Arrhenius kinetics measured by commercialized chip‐based calorimetry, which reports CGV 103−105 higher than those measured using PCM cells. Negligible thermal lag (<1.5 K) and no delamination is observed in this work. Melting, solidification, and specific heat of GST are also measured and agree with conventional calorimetry of bulk samples.

Glass Transition of the Phase Change Material AIST and its Impact on Crystallization

Fragile‐to‐Strong Transition in Phase‐Change Material Ge3Sb6Te5

In-situ Heating TEM Study of Phase Change Material

Ta-doped Ge5Sb95 Phase Change Thin Films for High Speed and Low Power Application

Increasing the Atomic Packing Efficiency of Phase‐Change Memory Glass to Reduce the Density Change Upon Crystallization

Superlattice-like Sb-Ge Thin Films for High Thermal Stability and Low Power Phase Change Memory

How Fragility Makes Phase-Change Data Storage Robust: Insights from Ab Initio Simulations.

Electrical Properties of Cr-Doped Sb2te3 Phase Change Material

Exploring "No Man's Land"—Arrhenius Crystallization of Thin‐Film Phase Change Material at 1 000 000 K s−1 via Nanocalorimetry

Interface controlled thermal properties of ultra-thin chalcogenide-based phase change memory devices

Exploring “no Man's Land”—Arrhenius Crystallization of Thin‐Film Phase Change Material at 1 000 000 K S−1 Via Nanocalorimetry (adv. Mater. Interfaces 23/2022)

In Situ Insight into Temperature-Dependent Microstructure Evolution of Carbon Doped Phase Change Materials

Nanomechanical morphology of amorphous, transition, and crystalline domains in phase change memory thin films

Characterization of Cr-doped Sb2 Te3 Films and Their Application to Phase-Change Memory

Gete/Crsb2te Superlattice-Like Thin Film for Excellent Thermal Stability and High Phase Change Speed

Study on Thermophysical Properties and Phase Change Regulation Mechanism of Optically-Controlled Phase Change Materials: Synthesis, Crystal Structure and Molecular Dynamics

Advantages of Ta-Doped Sb3Te1 Materials for Phase Change Memory Applications

Interface controlled thermal resistances of ultra-thin chalcogenide-based phase change memory devices

Thermally-induced nanoscale phase change in chalcogenide glass Cr2Ge2Te6 revealed by scanning tunneling microscopy

Insights into the Heterogeneous Nuclei of an Ultrafast‐Crystallizing Glassy Solid

In-situ Observation of Ge2Sb2Te5 Crystallization at the Passivated Interface