Abstract:Currently, there is a demand in the aerospace industry for a more effective and non-invasive milling technique for powder metallurgy γ-TiAl alloy. The primary objective of this research is to examine the surface milling process of a γ-TiAl alloy generated by powder metallurgy. The primary objective of this study is to examine the impact of process parameters on the surface roughness and cutting force of the alloy, with the aim of optimizing both surface roughness and cutting force. The response surface method was implemented to examine the milling process, and the NSGA II algorithm was employed to optimise surface roughness, cutting force, and material removal rate. The findings indicate that the cutting depth exerts a significant impact on both the surface morphology and surface roughness. The available data indicates a clear correlation between the depth of cutting and the rate of feed, as well as the resulting assessment of surface roughness. Nevertheless, the first rise in spindle speed is associated with a subsequent increase in surface roughness, followed by a subsequent drop of a lesser magnitude. A minimal threshold for surface roughness has been established at 0.203μm. The spindle speed exerts the primary impact on the cutting force. There exists a positive link between the cutting force value and both the cutting depth and feed speed, as the cutting force value has a positive correlation with the incremental changes in these variables. Nevertheless, the relationship between cutting force and the observed trend is non-linear, exhibiting an initial decrease followed by a rise when cutting force is augmented. The minimal cutting force necessary was quantified as 112.3 N. Subsequently, a regression analysis was employed to develop a correlation model between surface roughness and cutting force. and machining parameters. The confirmation of the coefficients' validity in the model was achieved via the utilisation of analysis of variance (ANOVA) and residual analysis. The main goal of developing a machining parameter optimisation model is to limit surface roughness and cutting force, thereby improving operational efficiency. The NSGA-II method is utilised to tackle the problem of multi-objective optimisation, leading to the attainment of the optimal parameter solution. The purpose of the verification test is to evaluate the precision of the forecasts generated by the optimised model. The work holds importance in its analysis and juxtaposition of diverse processing factors, alongside the use of multi-objective optimization methodologies.

Process Optimization of Polishing Titanium Alloy Material with a Pulsating Air Jet

Analysis and Optimization of Process Parameter Intervals for Surface Quality in Polishing Ti-6Al-4V Blisk Blade

Investigation into a novel pulsating cavitation air jet polishing method for Ti-6Al-4V alloy

ENHANCED MATERIAL REMOVAL RATE AND SURFACE QUALITY IN Ti-6Al-4V BLISK BLADE POLISHING BY GRA-RBF-FA METHOD

Study on Multi-Objective Optimization of Milling Process of Powder Metallurgy Titanium Aluminum Alloys

Research Progress on Surface Polishing Technology of Powder Bed Fusion Titanium Alloy

Removal mechanism of submerged air jet polishing considering the state of abrasive particles

Evaluation and Improvement of Material Removal Rate with Good Surface Quality in TC4 Blisk Blade Polishing Process

Optimization of Abrasive Flow Polishing Process Parameters for Static Blade Ring Based on Response Surface Methodology

Optimal Parameter Selection In Robotic Belt Polishing For Aeroengine Blade Based On Gra-Rsm Method

Processing Optimization for Halbach Array Magnetic Field-Assisted Magnetic Abrasive Particles Polishing of Titanium Alloy

Machinability Improvement of Titanium Alloy in Face Grinding by Ultrasonic Assisted Jet Plasma Oxidation

A profile-adaptive compliant polishing tool for aero-engine blade finishing process

Numerical and experimental investigation on the material removal profile during polishing of inner surfaces using an abrasive rotating jet

Electrochemical Polishing Method for Titanium Alloys with a Microgroove Structure

Pre-mixed abrasive waterjet peening with post-low stress milling process and the effect of process parameters on the surface integrity of TC11 titanium alloy

Parameters Optimization for Electropolishing Titanium by Using Taguchi-Based Pareto ANOVA

Optimizing microstructures and properties of PEO coatings on sandblasted pure titanium: the influence of jet angle

Process Parameter Interval Sensitivity and Optimization of Machined Surface Roughness for High-speed Milling of Titanium Alloys

Electropolishing of Titanium Alloy under Hydrodynamic Mode

Ablation oxidation and surface quality during laser polishing of TA15 aviation titanium alloy