Abstract:The usage of copper (Cu) ores containing low or no arsenic (As) has reduced, and Cu ores containing high levels of As have emerged as vital mineral resources for Cu extraction and processing. The quality of the Cu ores has decreased from 1.6% to approximately 1.0%. The proportion of As to Cu in 15% of Cu resources currently reaches 1:5. However, during the extraction and processing of Cu ores, As presents significant environmental harm. Hence, safely and effectively removing As is paramount in Cu smelting and processing, holding substantial importance in fostering environmentally sustainable practices within the Cu extraction and processing industry. This article consolidates the resource distribution of As-containing Cu (ACC) ores, comprehensively and systematically evaluates the present advancements in extracting techniques for these minerals, and identifies the challenges inherent in pyrometallurgical and wet processes for treating ACC deposits. Pyrometallurgy is a simple primary roasting technique and has widespread applicability in the treatment of various ACC minerals. Its disadvantages are the emission of exhaust gas and the high treatment costs associated with it. The wet arsenic removal method boasts advantages including minimal air pollution and a high resource recovery rate, significantly aiding in Cu concentrate recovery; its major drawback is the production of As-containing wastewater. The hydrometallurgical removal of As from ACC mines involves extracting As through leaching. Recently, biometallurgy has presented innovative solutions using specialized microorganisms to bioleach or bioabsorb As, but large-scale industrial applications still lack specific practical implementation. This review explores the underlying causes of the challenges encountered in processing ACC minerals. Additionally, it highlights pyrometallurgical roasting coupled with high-temperature filtration as a pivotal advancement in the extraction and processing of ACC ores.

A green strategy toward extraction of cadmium(II) during the transformation from arsenic-rich flue dust to scorodite

In-situ Upcycling of Cadmium from Wastewater into Core–shell ZnS@Zn0.58Cd0.42S Heterojunction Photocatalyst for Environmental Purification and H2 Evolution

Minimization and stabilization of smelting arsenic-containing hazardous wastewater and solid waste using strategy for stepwise phase-controlled and thermal-doped copper slags

Cotreatment strategy for hazardous arsenic-calcium residue and siderite tailings via arsenic fixation as scorodite

Arsenic removal from acid extraction solutions of copper smelting flue dust

Removal and immobilization of arsenic from copper smelting wastewater using copper slag by in situ encapsulation with silica gel

Comprehensive recovery of arsenic and antimony from arsenic-rich copper smelter dust

Transformation of Arsenic During Realgar Tailings Stabilization Using Ferrous Sulfate in a Pilot-Scale Treatment.

Co-treatment of copper smelting flue dust and arsenic sulfide residue by a pyrometallurgical approach for simultaneous removal and recovery of arsenic

Simultaneous recovery of arsenic and copper from copper smelting slag by flotation: Redistribution behavior and toxicity investigation

Hydrothermal treatment of arsenic sulfide slag to immobilize arsenic into scorodite and recycle sulfur

Co-high-efficiency washing agents for simultaneous removal of Cd, Pb and As from smelting soil with risk assessment

Eco-utilization of steel slag: Preparation of Fe-based calcium silicate hydrate and its application in As(V) removal

Synergy of directional oxidation and vacuum gasification for green recovery of As2O3 from arsenic-containing hazardous secondary resources

Ultrasound-Assisted Selective Leaching of Arsenic from Copper Smelting Flue Dust

In situ mechanochemical activation of reduced iron powder for arsenic stabilization in high content arsenic sulfide sludge

Alkali circulating leaching of arsenic from copper smelter dust based on arsenic-alkali efficient separation

Removal of arsenic from “Dirty acid” wastewater via Waelz slag and the recovery of valuable metals

An Arsenic Removal Technology and Its Application in Arsenic-Containing Copper

An all-in-one strategy for resource recovery and immobilization of arsenic from arsenic-bearing gypsum sludge

Leaching and removal of arsenic with waste acids from arsenic pre-removed dusts discharged from furnaces for pyrometallurgical refining of copper