Abstract:The wide bandgap, high-breakdown electric field, and high carrier mobility makes GaN an ideal material for high-power and high-frequency electronics applications, such as wireless communication and radar systems. However, the performance and reliability of GaN-based high-electron-mobility transistors (HEMTs) are limited by the high channel temperature induced by Joule heating in the device channel. Integration of GaN with high thermal conductivity substrates can improve the heat extraction from GaN-based HEMTs and lower the operating temperature of the device. However, heterogeneous integration of GaN with diamond substrates presents technical challenges to maximize the heat dissipation potential brought by the ultrahigh thermal conductivity of diamond substrates. In this work, two modified room-temperature surface-activated bonding (SAB) techniques are used to bond GaN and single-crystal diamond. Time-domain thermoreflectance (TDTR) is used to measure the thermal properties from room temperature to 480 K. A relatively large thermal boundary conductance (TBC) of the GaN/diamond interfaces with a ∼4 nm interlayer (∼90 MW/(m<sup>2</sup> K)) was observed and material characterization was performed to link the interfacial structure with the TBC. Device modeling shows that the measured TBC of the bonded GaN/diamond interfaces can enable high-power GaN devices by taking full advantage of the ultrahigh thermal conductivity of single-crystal diamond. For the modeled devices, the power density of GaN-on-diamond can reach values ∼2.5 times higher than that of GaN-on-SiC and ∼5.4 times higher than that of GaN-on-Si with a maximum device temperature of 250 °C. Our work sheds light on the potential for room-temperature heterogeneous integration of semiconductors with diamond for applications of electronics cooling, especially for GaN-on-diamond devices.

A Simulation of Thermal Management Using a Diamond Substrate with Nanostructures

Thermal modeling, analysis, and management of high-power GaN transistors

Enhanced Heat Dissipation of GaN RF Devices Based on Double-diamond Structure

Simulations of Diamond Heat Spreader for the Thermal Management of Gan Hemt

A Novel Strategy for GaN-on-Diamond Device with a High Thermal Boundary Conductance

Interfacial Thermal Conductance across Room-Temperature-Bonded GaN/Diamond Interfaces for GaN-on-Diamond Devices

A Strategy for Enhancing Interfacial Thermal Transport in Ga2O3-diamond Composite Structure by Introducing an AlN Interlayer

Diamond as the heat spreader for the thermal dissipation of GaN-based electronic devices

FEM Thermal Analysis of High Power GaN-on-diamond HEMTs

Tunable Thermal Energy Transport across Diamond Membranes and Diamond-Si Interfaces by Nanoscale Graphoepitaxy

Thermal Boundary Conductance Enhancement of the Si/Diamond Interface via Atomic Transition Strategy

Low thermal resistance GaN-on-diamond transistors characterized by three-dimensional Raman thermography mapping

High Performance ${eta}$ -Ga 2 O 3 Nano-Membrane Field Effect Transistors on a High Thermal Conductivity Diamond Substrate

Diamond single crystal-polycrystalline hybrid microchannel heat sink strategy for directional heat dissipation of hot spots in power devices

A strategy for enhancing interfacial thermal transport in Ga 2 O 3 -diamond composite structure by introducing an AlN interlayer

Modulating Microstructure and Thermal Properties of Diamond/sinx/gan Multilayer Structure by Diamond Growth Temperature

Thermal Boundary Conductance Enhancement Using Experimentally Achievable Nanostructured Interfaces - Analytical Study Combined with Molecular Dynamics Simulation.

Fem Thermal and Stress Analysis of Bonded Gan-On-Diamond Substrate

Thermal Performance Improvement of AlGaN/GaN HEMTs Using Nanocrystalline Diamond Capping Layers

Polycrystalline Diamond Film Growth on Gallium Nitride with Low Boundary Thermal Resistance

Large “near Junction” Thermal Resistance Reduction in Electronics by Interface Nanoengineering