Abstract:This paper deals with the optimal design of a current-starved voltage-controlled oscillator (CSVCO) utilizing a bio-inspired optimization technique, the multi-objective salp swarm algorithm (MSSA). The optimal design problem consists of several conflicting objective functions. Different performance parameters including phase noise, dynamic power consumption, tuning range (TR), area, and figure of merit (FOM) of the voltage-controlled oscillator are considered the objectives for optimization, while oscillation frequency is regarded as a constraint. The optimal transistor sizing of the VCO circuit is achieved using the MSSA, and the MSSA-based optimal transistors are applied to design the CSVCO circuit in Cadence software using the 1.2 V/2.5 V 1P9M 90 nm CMOS salicide process. The designed VCO oscillates at a frequency of 2.00003 GHz, and it shows phase noise of −92.09 dBc/Hz at 1 MHz offset frequency while consuming 397.86 μW power. The tuning range is 33.05%, and the physical area is 0.647 μm 2 . The proposed design yields a 0.0015% variation in the oscillation frequency. Monte Carlo simulations are performed on the parasitic extracted netlist of the CSVCO to determine the effect of the process variations on its different performance parameters. The MSSA-based optimal design of the parasitic and process-variation-aware CSVCO circuit produces better performance parameters relative to those of previously reported studies, particularly in terms of the oscillation frequency, phase noise, and power consumption. This proposed methodology can also be applied to different very large-scale integration (VLSI) analog circuits to enhance the different performance parameters.

Development and Performance Evaluation of Optimal Low Phase Noise and Wide Tuning Range Current-Starved VCO Using Multi-objective Salp Swarm Algorithm

An Improved Low Phase Noise LC-VCO with Wide Frequency Tuning Range Used in CPPLL

Design of Parasitic and Process-Variation Aware Nano-CMOS RF Circuits: A VCO Case Study

An Ultra-Low-Voltage High-Performance VCO in 0.13 μm CMOS

Multiobjective Optimization of Class-F Oscillators

Design of Area-Optimized Low-power Voltage Reference Circuits using a Modified Particle Swarm Optimization

Symmetrical Spiral Inductor Design and Optimization for VCO Design in 0.35/spl Mu/m CMOS Technology

CMOS Voltage-Controlled Oscillator with Complementary and Adaptive Overdrive Voltage Control Structures

Design Optimizations of Phase Noise, Power Consumption and Frequency Tuning for Vco

Design and Analysis of Low Power and High Frequency Current Starved Sleep Voltage Controlled Oscillator for Phase Locked Loop Application

Symmetrical spiral inductor design and optimization for VCO design in 0.35μm CMOS technology

A Wideband Simplified Transformer-Based VCO with Digital Amplitude Calibration.

Dual-Band Quad-Core Transformer Coupled Vco with Phase Noise Optimization

A Low Power, Wide Linear-Range CMOS Voltage-Controlled Oscillator

A Highly Linear Ultra-Low-Area-and-Power CMOS Voltage-Controlled Oscillator for Autonomous Microsystems

Optimal Design of 2.4 GHz ISM Band CMOS LNA Using the Cat Swarm Optimization Algorithm

Design of Low Phase-Noise, Wide Band LC VCO

0.13 μm Low-Power CMOS Current Starved VCO for Vibration Energy Harvesters

An evolutionary algorithm based approach for optimal design of low power CMOS two-stage comparator

A Transformer-Based Series-Resonance CMOS VCO

A 5-Ghz Low Phase Noise and Wide Tuning Range Voltage Controlled Oscillator Design