Abstract:In this work, we, for the first time, observed the remarkable thermoelectric properties of a few high-quality PtSe2 layered films fabricated by a post selenization of Pt thin films. An excellent power factor of ≳200 μW/mK2 with a Seebeck coefficient of >100 μV/K in the PtSe2 layered film of 10 layers can be experimentally demonstrated over a wide temperature range, which is much better than those of most of the two-dimensional materials reported in the literature. Optical absorption spectra and DFT (density functional theory) calculations indicate a semiconductor–metal transition at a critical thickness once the thickness increases from 7.7 (15 layers) to 14.3 nm (30 Layers). The results are consistent with the experimental results of the dramatic reduction in the power factor, the magnitude of the Seebeck coefficient, and the resistivity when the thickness increases from 7.7 (15 layers) to 14.3 nm (30 Layers). Nevertheless, the semiconductor–metal transition would occur when the thickness increases from 1.5 nm (3 layers) to 2 nm (4 layers). To figure out this unusual performance, a detailed material examination has been conducted. After the transmission electron microscopy examination, ∼7% biaxial compressive strain built in the polycrystalline PtSe2 thin film can be observed. The strain, as revealed by our DFT calculations, plays an important role in opening the electronic energy gap and hence significantly improves the thermoelectric performance. Boltzmann transport calculation results suggested that both the strain and the hole concentration in the p-type specimens are well optimized. We further propose that an even better power factor can be achieved with n-type-doped PtSe2.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.chemmater.0c04351?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.chemmater.0c04351</a>.Detailed experimental sections; TEM image of a PtSe2 layered film with a thickness of 25.5 nm (50 layers); EDS analysis of the PtSe2 layered film with a thickness of 25.5 nm (50 layers); thickness dependence of the electronic gap; schematic of thermoelectric measurements; in situ XRD results of PtSe2 layered film with a thickness of 5 nm (10 layers); thermoelectric properties as a function of Fermi level; and determination of the Fermi level position (<a class="ext-link" href="/doi/suppl/10.1021/acs.chemmater.0c04351/suppl_file/cm0c04351_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

High carrier mobility epitaxially aligned PtSe2 films grown by one-zone selenization

Thickness-dependent Carrier Transport of PdSe2 Films Grown by Plasma-Assisted Metal Selenization

Thickness-dependent carrier transport of PdSe 2 films grown by plasma-assisted metal selenization

Scalable Metal–Organic Chemical Vapor Deposition of High Quality PtSe2

High Quality Atomically Thin PtSe2 Films Grown by Molecular Beam Epitaxy

Metal-Organic Chemical Vapor Deposition of PtSe2

Precise Layer‐Dependent Electronic Structure of MBE‐Grown PtSe2

Electrical devices from top-down structured platinum diselenide films

Layer-dependent Optical and Dielectric Properties of Large-size PdSe_2 Films Grown by Chemical Vapor Deposition

MBE-grown ultrathin PtTe2 films and their layer-dependent electronic structures

Large‐area High Quality PtSe2 Thin Film with Versatile Polarity

Metal domain size dependent electrical transport in Pt-CdSe hybrid nanoparticle monolayers

Electrical characterization of structured platinum diselenide devices

Monolayer Ptse2, A New Semiconducting Transition-Metal-Dichalcogenide, Epitaxially Grown by Direct Selenization of Pt

Homogeneous Platinum Diselenide Metal/semiconductor Coplanar Structure Fabricated by Selective Thickness Control.

Thermally Strain-Induced Band Gap Opening on Platinum Diselenide-Layered Films: A Promising Two-Dimensional Material with Excellent Thermoelectric Performance

High-Electron- Mobility and Air-Stable 2d Layered Ptse2 Fets

Single-Layer PtSe2 Adsorbed with Non-Metallic Atoms: Geometrical, Mechanical, Electronic and Optical properties and Strain Effects

Correlating Nanocrystalline Structure with Electronic Properties in 2D Platinum Diselenide

Epitaxial Synthesis of Monolayer PtSe2 Single Crystal on MoSe2 with Strong Interlayer Coupling

Structural and Morphological Studies of Pt in the As-Grown and Encapsulated States and Dependency on Film Thickness