Tunable coupling of two mechanical resonators by a graphene membrane

G.J. Verbiest,M. Goldsche,J. Sonntag,T. Khodkov,N. von den Driesch,D. Buca,C. Stampfer

DOI: https://doi.org/10.48550/arXiv.2005.05358

2020-11-07

Abstract:Coupled nanomechanical resonators are interesting for both fundamental studies and practical applications as they offer rich and tunable oscillation dynamics. At present, the mechanical coupling in such systems is often mediated by a fixed geometry, such as a joint clamping point of the resonators or a displacement-dependent force. Here we show a graphene-integrated electromechanical system consisting of two physically separated mechanical resonators -- a comb-drive actuator and a suspended silicon beam -- that are tunably coupled by a graphene membrane. The graphene membrane, moreover, provides a sensitive electrical read-out for the two resonating systems silicon structures showing 16 different modes in the frequency range from 0.4~to 24~MHz. In addition, by pulling on the graphene membrane with an electrostatic potential applied to one of the silicon resonators, we control the mechanical coupling, quantified by the $g$-factor, from 20 kHz to 100 kHz. Our results pave the way for coupled nanoelectromechanical systems requiring controllable mechanically coupled resonators.

Mesoscale and Nanoscale Physics,Materials Science

What problem does this paper attempt to address?

The problem that this paper attempts to solve is: how to achieve tunable coupling between two mechanical resonators while providing a highly sensitive electrical read - out scheme. Specifically, the author presents an electromechanical system integrated with a graphene membrane. This system contains two physically separated mechanical resonators - a comb - driven actuator and a suspended silicon beam, and the tunable coupling between the two is achieved through the graphene membrane.

### Main problems:
1. **Fixed geometric contact or clamping points limit the control of mechanical coupling**:
- Currently, mechanical coupling is usually achieved through fixed geometric structures (such as common clamping points) or position - dependent forces, which limits the control of coupling strength.

2. **Lack of frequency tunability and weak vibration coupling**:
- The existing mechanical resonators in silicon - based micro - electro - mechanical systems (MEMS) have the problems of non - tunable frequency and weak vibration coupling, which makes achieving independent and controllable mechanical coupling in these systems a major technical challenge.

### Solutions:
- **Using the graphene membrane as a coupling medium**:
- The graphene membrane not only provides the function of mechanical coupling but can also be used as a sensitive electrical read - out element to detect the motion of the two resonant systems.

- **Regulating the coupling strength through electrostatic potential**:
- By applying an electrostatic potential to one of the silicon resonators, the mechanical coupling on the graphene membrane can be controlled, thereby achieving a coupling strength adjustment from 20 kHz to 100 kHz.

### Experimental results:
- **Sixteen different vibration modes**:
- In the frequency range from 0.4 MHz to 24 MHz, the system exhibits 16 different vibration modes.

- **Significantly enhanced coupling strength**:
- Compared with the system without an integrated graphene membrane, the coupling strength is increased by nearly 1000 times, reaching approximately 100 kHz.

### Significance:
- **Opens up new research directions**:
- This result provides a platform for studying chaotic paths in nonlinear dynamics, and can read out quantum states at specific time points while minimizing back - action effects at other times.

Through the above methods, the author has successfully solved the problem of limited mechanical coupling control in existing systems and demonstrated the great potential of the graphene membrane in nano - electro - mechanical systems (NEMS).