Abstract:This study delves into the ductile damage mechanism via exploring the intrinsic nature of the transformation of void and strain localization induced damages. In tandem with this, tensile experiments were conducted by using ductile metals of pure titanium and austenite steel with different grain sizes ( d ̄ ) and sample thicknesses ( t ). Various damage behaviors were generated: the void damage ( Dv ) in which the damage is induced by voids and their evolution, the strain localization induced damage ( Dl ) in which damage is controlled by localized deformation, and their mixed mode. Examinations of damage characteristics show a transformation from Dl to Dv with the increase of t/d ̄ or hardening. To identify the decisive factor behind the mechanism, crystal plasticity finite element simulations were performed, and the grain-level non-homogeneous deformation was carefully examined. The materials with severe inhomogeneous deformation were found to have fewer voids, while the ones with more uniform deformation possessed evident void growth. Deformation heterogeneity was thus identified as a pivotal factor for the Dl - Dv transformation. The change of micro-defect configuration of void and grain boundary (GB) with deformation heterogeneity was discovered to be the underlying cause. In the Dv case, the large number of strain localization zones penetrating within the bulk promotes void nucleation and growth from vacancies and dislocations. The Dl case, on the other hand, gets more new GBs but smaller number of voids during deformation. The larger continuous strain localization zone facilitates the dislocation-consuming process of GB formation, resulting in the difficulty of void formation. Additionally, a characteristic parameter representing the deformation heterogeneity degree was defined. A Dl - Dv paradigm, which involves the change of damage mode and micro-defect configuration with deformation heterogeneity, and the characteristic parameter was established. The paradigm was validated to have a wide applicability with its efficiency in interpreting extensive damage phenomena. These explorations are expected to add new insights into the understanding of damage mechanism and support the development of a unified damage prediction platform.

Strain localization and failure of disordered particle rafts with tunable ductility during tensile deformation

3D Multiscale Modeling of Strain Localization in Granular Media

Aging-dependent Strain Localization in Amorphous Glassy Polymers: from Necking to Shear Banding

An overview of tailoring strain delocalization for strength-ductility synergy

The dynamic system of the traffic assignment problem: Part III. Incorporating traffic dynamics

Machine learning-informed structuro-elastoplasticity predicts ductility of disordered solids

Activating dispersed strain bands in tensioned nanostructure layer for high ductility: The effects of microstructure inhomogeneity

Shear localization in polycrystalline metal at high-strain rates with dynamic recrystallization: Crystal plasticity modeling and texture effect

Strain Field Around Individual Dislocations Controls Failure

The inhomogeneity of plastic deformation in ductile single crystals

Unraveling Crack Stability and Strain Localization in Staggered Composites by Fracture Analysis on the Shear-Lag Model

A Model for Athermal Strain Localization in Dry Sheared Fault Gouge

Unraveling the transformation of ductile damage mechanisms of void evolution and strain localization based on deformation heterogeneity

Rigidity percolation control of the brittle-ductile transition in disordered networks

Stress-dependence of Dislocation Dissociation, Nucleation and Annihilation in Elastically Anisotropic Cu

Strain rate dependency of dislocation plasticity

Microplasticity and yielding in crystals with heterogeneous dislocation distribution

Soft modes and strain redistribution in continuous models of amorphous plasticity: the Eshelby paradigm, and beyond?

Predicting the flow stress and dominant yielding mechanisms: analytical models based on discrete dislocation plasticity

Molecular Dynamics Simulation of Tensile Strain-Altered Hydrogen Behaviour and Its Effects on Local Plasticity

Strain localization in the standard triaxial tests of granular materials: Insights into meso‐ and macro‐scale behaviours