Abstract:Triply periodic minimal surface (TPMS) shell lattices are attracting increasingly attention due to their unique combination of geometric and mechanical properties, and their open-cell topology. However, uniform thickness TPMS shell lattices are usually anisotropic in stiffness, namely having different Young's moduli along different lattice directions. To reduce the elastic anisotropy, we propose a family of variable thickness TPMS shell lattices with isotropic stiffness designed by a strain energy-based optimization algorithm. The optimization results show that all the six selected types of TPMS lattices can be made to achieve isotropic stiffness by varying the shell thickness, among which N14 can maintain over 90% of the Hashin-Shtrikman upper bound of bulk modulus. All the optimized shell lattices exhibit superior stiffness properties and significantly outperform elastically-isotropic truss lattices of equal relative densities. Both uniform and optimized types of N14 shell lattices along [100], [110] and [111] directions are fabricated by the micro laser powder bed fusion techniques with stainless steel 316 L and tested under quasi-static compression loads. Experimental results show that the elastic anisotropy of the optimized N14 lattices is reduced compared to that of the uniform ones. Large deformation compression results reveal different failure deformation behaviors along different directions. The [100] direction shows a layer-by-layer plastic buckling failure mode, while the failures along [110] and [111] directions are related to the shear deformation. The optimized N14 lattices possess a reduced anisotropy of plateau stresses and can even attain nearly isotropic energy absorption capacity.

Optimal isotropic, reusable truss lattice material with near-zero Poisson's ratio

Nonlinear Mechanics of Horseshoe Microstructure-Based Lattice Design

Bending‐Free Lattices as Underlying Optimal Isotropic Microstructures of the Least‐Compliant 2D Elastic Bodies

Truss and plate hybrid lattice structures: Simulation and experimental investigations of isotropy, large-strain deformation, and mechanisms

Isotropic Octet-Truss Lattice Structure Design and Anisotropy Control Strategies for Implant Application

Soft network materials with isotropic negative Poisson's ratios over large strains.

Analytical design of stretching-dominated truss lattices with tailored elasticity from transversely isotropic base materials

Lattice structures with a negative Poisson's ratio: Energy absorption assessment

Controllable Three-Dimension Auxetic Structure Design Strategies Based on Triply Periodic Minimal Surfaces and Dual Period Deformation Function

Lattice structures with negative Poisson's ratio: A review

Meta-structure with stable isotropic negative Poisson's ratio based on the cube-framework stacked by Kirigami units

Elastically-isotropic open-cell minimal surface shell lattices with superior stiffness via variable thickness design

An Unusual 3D Metamaterial with Zero Poisson's Ratio in Partial Directions

Topology optimization design of microstructures with zero Poisson's ratio

Elastically Isotropic Truss‐Plate‐Hybrid Hierarchical Microlattices with Enhanced Modulus and Strength

A high-performance design of tubular lattice structure having zero Poisson's ratio

Design and testing of 3D-printed micro-architectured polymer materials exhibiting a negative Poisson's ratio

Bioinspired Nested-Isotropic Lattices with Tunable Anisotropy for Additive Manufacturing

A class of elastic isotropic plate lattice materials with near-isotropic yield stress

High stiffness topology optimised lattice structures with increased toughness by porosity constraints

Multifunctional mechanical metamaterials with tunable double-negative isotropic properties