Abstract:Heat-resistant, load-bearing components are common in aircraft, and they have high requirements for lightweight and mechanical performance. Lattice topology optimization can achieve high mechanical properties and obtain lightweight designs. Appropriate lattice selection is crucial when employing the lattice topology optimization method. The mechanical properties of a structure can be optimized by choosing lattice structures suitable for the specific stress environment being endured by the structural components. Metal lattice structures exhibit excellent unidirectional load-bearing performance and the triply periodic minimal surface (TPMS) porous structure can satisfy multi-scale free designs. Both lattice types can provide unique advantages; therefore, we designed three types of metal lattices (body-centered cubic (BCC), BCC with Z-struts (BCCZ), and honeycomb) and three types of TPMS lattices (gyroid, primitive, and I-Wrapped Package (I-WP)) combined with the solid shell. Each was designed with high level of relative density (40%, 50%, 60%, 70%, and 80%), which can be directly used in engineering practice. All test specimens were manufactured by selective laser melting (SLM) technology using Inconel 718 superalloy as the material and underwent static tensile testing. We found that the honeycomb test specimen exhibits the best strength, toughness, and stiffness properties among all structures evaluated, which is especially suitable for the lattice topology optimization design of heat-resistant, unidirectional load-bearing structures within aircraft. Furthermore, we also found an interesting phenomenon that the toughness of the primitive and honeycomb porous test specimens exhibited sudden increases from 70% to 80% and from 50% to 60% relative density, respectively, due to their structural characteristics. According to the range of the exponent value n and the deformation laws of porous structures, we also concluded that a porous structure would exhibit a stretching-dominated deformation behavior when exponent value n 0.55, and a stretching-bending-dominated deformation behavior when 0.3 < n < 0.55. This study can provide a design basis for selecting an appropriate lattice in lattice topology optimization design.

High stiffness topology optimised lattice structures with increased toughness by porosity constraints

Nonlinear Mechanics of Horseshoe Microstructure-Based Lattice Design

Evaluating Lattice Mechanical Properties for Lightweight Heat-Resistant Load-Bearing Structure Design

Compressive Properties of 316L Stainless Steel Topology‐Optimized Lattice Structures Fabricated by Selective Laser Melting

Solid Stress-Distribution-Oriented Design and Topology Optimization of 3D-Printed Heterogeneous Lattice Structures with Light Weight and High Specific Rigidity

Isotropic Octet-Truss Lattice Structure Design and Anisotropy Control Strategies for Implant Application

Improving Mechanical Properties of Lattice Structures Using Nonuniform Hollow Struts

Design and Optimization of Conforming Lattice Structures

Bending‐Free Lattices as Underlying Optimal Isotropic Microstructures of the Least‐Compliant 2D Elastic Bodies

Stiffness, strength, anisotropy, and buckling of lattices derived from TPMS and Platonic and Archimedean solids

Elastically-isotropic open-cell minimal surface shell lattices with superior stiffness via variable thickness design

Lattice Ti Structures with Low Rigidity but Compatible Mechanical Strength: Design of Implant Materials for Trabecular Bone

3D architected isotropic materials with tunable stiffness and buckling strength

A novel design strategy to enhance buckling resistance of thin-walled single-cell lattice structures via topology optimisation

Porous structures inspired by porcupine quill: multiscale design optimization approach

A new multi-scale topology optimization framework for optimal combinations of macro-layouts and local gradings of TPMS-based lattice structures

Rate-dependent behaviour of additively manufactured topology optimised lattice structures

Architecting materials for extremal stiffness, yield and buckling strength

Transition boundaries and stiffness optimal design for multi-TPMS lattices

Numerical investigation of the effective mechanical properties and local stress distributions of TPMS-based and strut-based lattices for biomedical applications

Design of Multi-Topology Lattice Structures Based on a High-Quality Unit Cell Library