Abstract:This study presents innovative nested-isotropic lattices for additive manufacturing, drawing inspiration from bio-architectures found in cortical bone osteons, golden spirals, and fractals. These lattices provide tunable anisotropy by integrating architectural elements like ``nesting orders (NOs)'' and corresponding ``nesting orientations (NORs),'' along with repetitive self-similar X-cross struts and three four-fold axes of symmetry, resulting in a wide spectrum of lattice designs. Nine mono-nest and twenty multi-nest lattices, along with 252 parametric variations, are realized. The relative density \( \bar{\rho} \) and surface area density \( \bar{S} \) are calculated. Employing finite element-based numerical homogenization, elastic stiffness tensors are estimated to evaluate the anisotropic measure - Zener ratio \( Z \) and elastic modulus \( \bar{E} \) for all lattice designs. The mono-nest lattices generated considering higher NOs and respective NORs exhibit a transition from shear dominant to tensile/compression dominant (TCD) anisotropic behavior and their strut size variations show a strong influence on \( \bar{\rho} \), \( \bar{S} \), and \( \bar{E} \). In contrast, multi-nest lattices exhibit isotropic and neo-isotropic characteristics, with strut size mismatch exerting more influence on \( Z \). Increasing NOs and NORs result in isotropic or TCD behavior for most multi-nest lattices, with strut size mismatch leading to many isotropic lattices. These bio-inspired nested lattices, coupled with advancements in additive manufacturing, hold potential for diverse applications.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to develop new bionic nested isotropic lattice structures with adjustable anisotropy to meet the requirements of additive manufacturing (3D printing). Specifically, the research aims to design lattice structures with controllable anisotropic behavior by combining inspiration from biological structures, such as osteons in cortical bone, the golden spiral, and fractals, thereby overcoming the limitations of existing lattice structures in terms of performance and applications. ### Research Background and Problems 1. **Limitations of Existing Lattice Structures**: - Although traditional foam materials have near - isotropic behavior, they exhibit low structural efficiency, versatility, and manufacturing difficulty under compression and shear. - Conventional lattice structures (such as simple cubic, face - centered cubic, body - centered cubic, etc.) have improved mechanical properties, but still lack isotropy and are difficult to handle complex loads and evenly distribute stress. - Lattice structures defined by complex mathematical functions (such as triply periodic minimal surfaces), although having superior performance, are difficult to design and manufacture, especially in the case of high porosity. 2. **Requirements for Ideal Lattice Structures**: - **Isotropy**: Be able to evenly distribute stress. - **High Porosity**: Accommodate blood vessels and nerves and enhance osseointegration. - **High Surface Area Density**: Promote cell activities, such as adhesion, growth, and proliferation. - **Low Stiffness Mismatch**: Avoid stress shielding. - **High Fatigue Tolerance**: Increase service life. 3. **Research Objectives**: - Develop new lattice structures, combine the optimized characteristics of biological structures, and achieve adjustable and controllable anisotropic behavior. - Explore a wide range of lattice design spaces by adjusting the nesting order (NOs) and nesting orientation (NORs), and introducing self - similar X - shaped crossbars and four - fold symmetry axes. - Use finite - element analysis and numerical homogenization techniques to evaluate the relative density \(\bar{\rho}\), surface area density \(\bar{S}\) and elastic modulus \(\bar{E}\) of these lattice structures, and calculate the Zener ratio \(Z\) to measure the degree of anisotropy. ### Main Findings - **Mono - nest Lattices**: - As the nesting order (NO) increases, the anisotropic behavior changes from shear - dominated (SD) to tensile / compression - dominated (TCD). - Changing the nesting orientation (NOR) angle, the anisotropic behavior changes from TCD to isotropy. - **Multi - nest Lattices**: - Most multi - nest lattices exhibit perfect isotropy or new - isotropic characteristics. - An increase in the nesting order and direction leads to more lattice structures showing isotropy or TCD behavior. ### Conclusion These bionic nested lattice structures not only show a wide range of design possibilities but also provide potential solutions for various engineering applications, especially in areas such as load - bearing implants that require isotropy and high performance.

Bioinspired Nested-Isotropic Lattices with Tunable Anisotropy for Additive Manufacturing

Nonlinear Mechanics of Horseshoe Microstructure-Based Lattice Design

Design and study of novel Nested auxetic lattices with tunable and enhanced in-plane elastic properties

Isotropic Octet-Truss Lattice Structure Design and Anisotropy Control Strategies for Implant Application

Design of elastically isotropic shell lattices from anisotropic constitutive materials for additive manufacturing

Structure, Process, and Material Influences for 3D Printed Lattices Designed With Mixed Unit Cells

Experimental and numerical investigation of PLA based different lattice topologies and unit cell configurations for additive manufacturing

Lattice Structures—Mechanical Description with Respect to Additive Manufacturing

Customizable anisotropic microlattices for additive manufacturing: Machine learning accelerated design, mechanical properties and structural-property relationships

Concurrent Geometrico-Topological Tuning of Nanoengineered Auxetic Lattices Fabricated by Material Extrusion for Enhancing Multifunctionality: Multiscale Experiments, Finite Element Modeling and Data-Driven Prediction

Rate-dependent behaviour of additively manufactured topology optimised lattice structures

Tension-compression asymmetric mechanical behaviour of lattice cellular structures produced by selective laser melting

Bio‐Inspired Graded and Uniform Cylindrical Lattices Fabricated by Material Extrusion 3D Printing: An Experimental and Numerical Investigation

Anisotropic compression behaviors of bio-inspired modified body-centered cubic lattices validated by additive manufacturing

Generative Lattice Units with 3D Diffusion for Inverse Design: GLU3D

Hierarchical Triply Periodic Minimal Surface Shell Lattices With Superior Isotropic Elasticity: Design Guidelines, Fabrication, and Validation

Tailored elastic properties of beam-based lattice unit structures

Compressive Behavior of Novel Additively Manufactured Ti-6Al-4V Lattice Structures: Experimental and Numerical Studies

A nonlinear mechanics model of bio-inspired hierarchical lattice materials consisting of horseshoe microstructures

Horsetail-inspired lattice structures for bone scaffold applications

Stiffness, strength, anisotropy, and buckling of lattices derived from TPMS and Platonic and Archimedean solids