Abstract:Solution-processed organic-inorganic hybrids composing of MoO3 nanoparticles and PEDOT:PSS were developed for use in inverted organic solar cells as hole transporting layer (HTL). The hybrid MoO3:PEDOT:PSS inks were prepared by simply mixing PEDOT:PSS aqueous and MoO3 ethanol suspension together. A core-shell structure was proposed in the MoO3:PEDOT:PSS hybrid ink, where PEDOT chains act as the core and MoO3 nanoparticles connected with PSS chains act as the composite shell. The mixing with PEDOT:PSS suppressed the aggregation of MoO3 nanoparticles, which led to a smoother surface. In addition, since the hydrophilic PSS chains were passivated through preferentially connection with MoO3, the stronger adhesion between MoO3 nanoparticles and the photoactive layer improved the film forming ability of the MoO3:PEDOT:PSS hybrid ink. The MoO3:PEDOT:PSS hybrid HTL can therefore be feasibly deposited onto the hydrophobic photoactive polymer layer without any surface treatment. The use of the MoO3:PEDOT:PSS hybrid HTL resulted in the optimized P3HT:PC61BM- and PTB7:PC61BM-based inverted organic solar cells reaching highest power conversion efficiencies of 3.29% and 5.92%, respectively, which were comparable with that of the control devices using thermally evaporated MoO3 HTL (3.05% and 6.01%, respectively). Furthermore, less HTL thickness dependence of device performance was found for the hybrid HTL-based devices, which makes it more compatible with roll-to-roll printing process. In the end, influence of the blend ratio of MoO3 to PEDOT:PSS on photovoltaic performance and device stability was studied carefully, results indicated that the device performance would decrease with the increase of MoO3 blended ratio, whereas the long-term stability was improved.

Thin-film transistor electrical performance of hybrid MoS 2 -P3HT semiconductor layers

Inkjet-printed thin-film transistors using surfactant-based transition-metal dichalcogenide nanocomposites suspended in polymeric semiconductors

Two-dimensional MoS2-assisted Immediate Aggregation of Poly-3-hexylthiophene with High Mobility

Solution-Processed MoO3:PEDOT:PSS Hybrid Hole Transporting Layer for Inverted Polymer Solar Cells

Solution-Processed Mosx Thin-Films As Hole-Transport Layers for Efficient Polymer Solar Cells

High-performance MoS2/p+-Si heterojunction field-effect transistors by interface modulation

High‐Performance and Low‐Power Polycrystalline MoTe2 Thin Film Transistors with Solution‐Processed Ternary Oxide High‐k Dielectric

Mobility enhancement and highly efficient gating of monolayer MoS2 transistors with Polymer Electrolyte

Conjugated Polymer Controlled Morphology and Charge Transport of Small-Molecule Organic Semiconductors

Effect of doping of zinc oxide on the hole mobility of poly(3-hexylthiophene) in hybrid transistors

Poly(3-hexylthio) Thiophene Field-effect Transistor Device Performance: Impact of the Content of Hexylthio Side Chain on Backbone

Fabrication and Characterization of Hybrid Hole Transporting Layers of Organotin (IV) Semiconductors within Molybdenum Oxide/Poly(3,4-ethylenedyoxithiophene) Polystyrene Sulfonate Matrices

High Mobility Ambipolar MoS2 Field-Effect Transistors: Substrate and Dielectric Effects

Charge Transport Properties of Low Temperature Solution Processable Poly(3-Hexylthiophene)/Surface Modified Tio2 Bulk Heterojunction Systems

Poly(α-methylstyrene) polymer and small-molecule semiconductor blend with reduced crystal misorientation for organic thin film transistors

Optimal hole extraction performance in MoOx-incorporated PEDOT:PSS films for organic photovoltaics

Molybdenum Oxide Particles Doped in Hole Transport Layer to Enhance the Efficiency of Flexible Polymer Solar Cells

Organic-Inorganic Heterojunction Field-Effect Transistors

Enhanced hole injection and transport in molybdenum-dioxide-doped organic hole-transporting layers

Perovskite and Conjugated Polymer Wrapped Semiconducting Carbon Nanotube Hybrid Films for High-Performance Transistors and Phototransistors

Molecular Orientation Regulation of Hole Transport Semicrystalline-Polymer Enables High-Performance Carbon-Electrode Perovskite Solar Cells