Abstract:The PandaX-30T is a proposed next-generation experiment to study dark matter and neutrinos using a dual-phase time projection chamber with \textasciitilde30 tons of liquid xenon. An innovative xenon handling subsystem of the PandaX-30T, the First-X, is described in this paper. The First-X is developed to handle liquid xenon safely and efficiently, including liquefying and long-term storing xenon without losses or contamination, and transferring cryogenic liquid xenon between the storage module and the detector safely and effectively without venting out. The storage module of the First-X is five specially designed double-walled cylindrical vessels (Center Tanks) equipped with three heat exchangers each for pressure and temperature regulation. Each Center Tank is designed with a vacuum and multi-layer insulation and a maximum allowable working pressure of 7.1 MPa, allowing 6 tons of xenon to be stored at 165--178 K at 0.1--0.2 MPa in the liquid phase or up to 300 K and up to 6.95 MPa in the supercritical phase. High-pressure storage (\textgreater0.2 MPa) only occurs in case of long-term detector shutdown or lack of nitrogen, ensuring no-loss storage of 6 tons of xenon in the range 178--300 K. In this paper, the thermophysical performances of the First-X and innovative scenarios to conduct non-vented cryogen transportation were experimentally conducted and reported using liquid argon. The non-vented cryogenic liquid filling and pump-assisted cryogenic liquid recovery have been conducted with liquid argon at a mass flow rate of 1390 kg/h, corresponding to a xenon mass flow rate of 2140 kg/h. Compared with the PandaX-4T, the transportation of xenon between the detector and the storage module is conducted in the liquid phase rather than in the gaseous phase, and the filling rate and the recovery rate are increased by approximately 50 times and 30 times, respectively.

The TPC detector of PandaX-III Neutrinoless Double Beta Decay experiment

Status and Prospects of the PandaX-III Experiment

PandaX-III: Searching for Neutrinoless Double Beta Decay with High Pressure 136 Xe Gas Time Projection Chambers

Design and fabrication of low background, high energy resolution thermal bonding Micromegas detectors for the PandaX-III experiment

Microbulk Micromegas for the search of 0$νββ$ of 136Xe in the PandaX-III experiment

Topological Background Discrimination in the PandaX-III Neutrinoless Double Beta Decay Experiment

PandaX: a Liquid Xenon Dark Matter Experiment at CJPL

The potential of discrimination methods in a high pressure xenon TPC for the search of the neutrinoless double-beta decay of Xe-136

Slow Control System for PandaX-III Experiment

Measurement of Double Beta Decay Half-life of ^136xe with the PandaX-4T Detector

The Cryogenics and Xenon handling system for the PandaX-4T Experiment

Searching for Neutrino-less Double Beta Decay of $^{136}$Xe with PandaX-II Liquid Xenon Detector

Progress and Prospect of PandaX Experiment

Design, construction and commissioning of the PandaX-30T liquid xenon management system

Horizontal Position Reconstruction in PandaX-II

An improved design of the readout base board of the photomultiplier tube for future PandaX dark matter experiments

Neutron-induced nuclear recoil background in the PandaX-4T experiment

Determination of Double Beta Decay Half-Life of 136 Xe with the PandaX-4T Natural Xenon Detector

Low radioactive material screening and background control for the PandaX-4T experiment

Design and performance of a high-pressure xenon gas TPC as a prototype for a large-scale neutrinoless double-beta decay search

PandaX-xT: a Multi-ten-tonne Liquid Xenon Observatory at the China Jinping Underground Laboratory