Research on stress field inversion and large deformation level determination of super deep buried soft rock tunnel

Baojin Zhang,Zhongsheng Tan,Jinpeng Zhao,Fengxi Wang,Ke Lin
DOI: https://doi.org/10.1038/s41598-024-62597-9
IF: 4.6
2024-06-05
Scientific Reports
Abstract:Understanding the characteristics and distribution patterns of the initial geo-stress field in tunnels is of great significance for studying the problem of large deformation of tunnels under high geo-stress conditions. This article proposes a ground stress field inversion method and large deformation level determination based on the GS-XGBoost algorithm and the Haba Snow Mountain Tunnel of the Lixiang Railway. Firstly, the hydraulic fracturing method is used to conduct on-site testing of tunnel ground stress and obtain tunnel ground stress data. Then, a three-dimensional model of the Haba Snow Mountain Tunnel will be established, and it will be combined with the GS-XGBoost regression algorithm model to obtain the optimal boundary conditions of the model. Finally, the optimal boundary condition parameters are substituted into the three-dimensional finite-difference calculation model for stress calculation, and the distribution of the in-situ stress field of the entire calculation model is obtained. Finally, the level of large deformation of the Haba Snow Mountain Tunnel will be determined. The results show that the ground stress of the tunnel increases with the increase of burial depth, with the maximum horizontal principal stress of 38.03 MPa and the minimum horizontal principal stress of 26.07 MPa. The Haba Snow Mountain Tunnel has large deformation problems of levels I, II, III, and IV. Level III and IV large deformations are generally accompanied by higher ground stress (above 28 MPa) and smaller surrounding rock strength. The distribution of surrounding rock strength along the tunnel axis shows a clear "W" shape, opposite to the surface elevation "M" shape. It is inferred that the mountain may be affected by geological structures on both sides of the north and south, causing more severe compression of the tunnel surrounding rock at the peak.
multidisciplinary sciences
What problem does this paper attempt to address?
The problem that this paper attempts to solve is how to understand and determine the characteristics and distribution laws of the initial in - situ stress field of ultra - deep - buried soft - rock tunnels, as well as how to evaluate the large - deformation levels of the tunnels under high geological stress conditions. Specifically, the research focuses on the following aspects: 1. **In - situ stress field inversion method**: A in - situ stress field inversion method based on the GS - XGBoost algorithm is proposed to solve the in - situ stress measurement problem under high geological stress conditions encountered in tunnel construction. Through this method, the initial state and distribution of tunnel in - situ stress can be obtained more accurately. 2. **Determination of large - deformation levels**: Combined with the in - situ stress field data obtained from inversion, the large - deformation levels of the tunnel under different geological stress conditions are evaluated, thereby providing a scientific basis for the design and construction of the tunnel. 3. **Combination of field tests and numerical simulations**: Field in - situ stress tests are carried out by the hydraulic fracturing method to obtain the actual data of tunnel in - situ stress, and these data are combined with the three - dimensional finite - difference calculation model to verify the effectiveness of the inversion method, and finally obtain the in - situ stress field distribution of the entire calculation model. The main objective of the paper is to provide reliable data support for the support design of ultra - deep - buried soft - rock tunnels through the above methods, reduce construction risks, and improve the safety and economy of the project.