Abstract:Based on efficiency and environmental concerns, the development of porous carbon from waste and biomass materials has attracted extensive attention as a novel approach. In this study, poplar sawdust was an inexpensive carbon precursor, sulfur-containing waste liquid (SCWL) was used as a modifier to turn waste into treasure, and potassium oxalate (K2C2O4) was a mild activator, successfully prepared N, S, O co-doped new porous activated carbon with excellent CO2 capture performance. The heteroatom doping and pore structure can be controlled by using SCWL and K2C2O4, and adjusting the activation temperature. The best sample (PCSK-2-3-800) prepared with SCWL and K2C2O4 showed excellent CO2 adsorption performance, reaching 3.82 and 5.61 mmol/g under normal pressure at 25 and 0 °C, respectively. This is attributed to the synergy of porous structure and surface chemistry. The pore structure parameter results showed that K2C2O4 promotes the development of activated carbon pore structure. The specific surface area, micropore volume and narrow micropore volume of PCSK-2-3-800 are 1418 m2/g, 0.55 cm3/g and 0.43 mL/g, respectively. The characterization results of FTIR and XPS showed that the addition of SCWL can successfully introduce heteroatoms into the carbon skeleton, and form CO2-philic active sites on the surface of the porous carbon. Both aspects promoted the adsorption of CO2. In addition, the PCSK-2-3-800 sample has a moderate adsorption heat of 27.13 kJ/mmol, good adsorption selectivity of CO2 and N2 is 13, and excellent recyclability, which is very promising for CO2 separation or storage. This paper develops a sustainable scheme for the first-time using biomass and SCWL to develop a new solid carbon adsorbent, which provides useful information and inspiration for capturing CO2.

Coffee grounds derived N enriched microporous activated carbons: Efficient adsorbent for post-combustion CO2 capture and conversion

The Application of Biochar for CO<sub>2</sub> Capture: Influence of Biochar Preparation and CO<sub>2</sub> Capture Reactors

Design and development of 3D hierarchical ultra-microporous CO2-sieving carbon architectures for potential flow-through CO2 capture at typical practical flue gas temperatures

Post-combustion CO2 capture from a natural gas combined cycle power plant using activated carbon adsorption

Cost-effective carbon-based amine adsorbents for carbon capture: Equilibrium, kinetics and selectivity

High Density and Super Ultra‐Microporous‐Activated Carbon Macrospheres with High Volumetric Capacity for CO2 Capture

A green trace K2CO3 induced catalytic activation strategy for developing coal-converted activated carbon as advanced candidate for CO2 adsorption and supercapacitors

High-Performance Activated Carbons Synthesized from Nanocellulose for CO2 Capture and Extremely Selective Removal of Volatile Organic Compounds

N-doped hierarchically porous carbons prepared with the assistance of chemical blowing and in-situ hard template as highly efficient CO 2 adsorbents: A combined experimental and theoretical study

Ultra-microporous cotton fiber-derived activated carbon by a facile one-step chemical activation strategy for efficient CO 2 adsorption

Nitrogen-Doped Ultrahigh Microporous Carbons Derived from Two Nitrogen-Containing Post-Cross-Linked Polymers for Efficient CO2 Capture

High yield nitrogen-doped carbon monolith with rich ultramicropores prepared by in-situ activation for high performance of selective CO2 capture

Spherical Potassium Intercalated Activated Carbon Beads for Pulverised Fuel CO2 Post-Combustion Capture

Porous activated carbons derived from waste sugarcane bagasse for CO2 adsorption

Activated Carbons Prepared from Peanut Shell and Sunflower Seed Shell for High CO2 Adsorption

Synthesis and characterization of advanced bio-carbon materials from Kraft lignin with enhanced CO2 capture properties

A green strategy to prepare nitrogen-oxygen co-doped porous carbons from macadamia nut shells for post-combustion CO2 capture and supercapacitors

Selectable Microporous Carbons Derived from Poplar Wood by Three Preparation Routes for CO 2 Capture

A cost-effective synthesis of heteroatom-doped porous carbon by sulfur-containing waste liquid treatment: As a promising adsorbent for CO2 capture

The development of activated carbon from corncob for CO2 capture

Systematic study of dynamic CO2 adsorption on activated carbons derived from different biomass