Abstract:Corrosion of steel reinforcement severely affects the load-bearing capacity of reinforced concrete elements. Accelerated corrosion of reinforcement by electrolytic methods (i.e., impressed current methods) is an effective technique to obtain corroded concrete specimens in a short time. To study the applicability of the accelerated corrosion methods, this study artificially induces corrosion in the longitudinal reinforcement and stirrups, and investigates the effects of different wire connection methods on the corrosion characteristics. The amount of rust, surface morphology of rusted steel, morphology of corrosion product, rate of corrosion, and mechanical properties of corroded specimens were investigated. The results show that under the same corrosion condition, the rusting occurs first in the stirrups, and the corrosion rate of stirrups is higher than that of longitudinal reinforcement, regardless of the wiring method. Under the same targeted corrosion rate, the corrosion-induced expansion and surface morphology are identical for different wiring methods. The ultimate bearing capacity and stiffness of corroded specimens decrease with the increase of corrosion rate. The connection method has little influence on the bearing capacity, stiffness, strain, macroscopic mechanical properties, and failure characteristics of the corroded specimens. (C) 2020 Elsevier Ltd. All rights reserved.

Influence of Current on Soil Corrosion of Galvanized Steel of Grounding Grids

Research Advances of Soil Corrosion of Grounding Grids

Review on Soil Corrosion and Protection of Grounding Grids

Study on the Corrosion Characteristics of Grounding Materials in Acid Red Soil

Galvanic Effect and Alternating Current Corrosion of Steel in Acidic Red Soil

Investigation on test schemes for grounding grids corrosion diagnosis

Novel Method Of Corrosion Diagnosis For Grounding Grid

Influence of Ground Return Current from HVDC Earthing Electrode on Buried Metal Pipeline

The Theory and Implementation of Corrosion Diagnosis for Grounding System

Study of the Influence of UHVDC Systems Shared Grounding Electrode on the Environment

Influence of alternating current on corrosion behavior of X100 steel in Golmud soil simulated solution with different pH

X80 Steel Corrosion Induced by Alternating Current in Water-Saturated Acidic Soil

Research on Corrosion Causes of Common Metal Material in Power Grid

Macro-galvanic corrosion of tower grounding device consisting of graphite and Zn-coated steel in a simulated soil environment

Influence of vertical grounding electrodes on electrical characteristics of grounding systems

Method for Calculating the Galvanic Corrosion Rate of Copper-steel Connected Ground Grids

Electrochemical studies of the galvanic coupling zinc/pipeline steel in the presence of an applied alternating current

Research on improving DC current distribution in earth by interconnecting DC grounding electrodes

Effect of pH value on corrosion of carbon steel under an applied alternating current

Review of Corrosion Resistant Metals for Grounding

Study of Wiring Method on Accelerated Corrosion of Steel Bars in Concrete