Abstract:The low-cycle fatigue of strongly-textured Mg alloys is dominated mainly by an alternation of twinning-detwinning process, which poses a great challenge to conventional constitutive models. As a result, a good reproduction of both mechanical response and deformation behavior often fails in previous simulations, in particular for high strain amplitudes. In the present study, the numerical simulations of low-cycle fatigue behavior of an Mg AZ31 plate with a ± 2% axial strain amplitude along the rolling direction were conducted, using a modified crystal-plasticity based on the finite strain elastic-viscoplastic self-consistent model containing twinning and detwinning mechanisms (EVPSC-TDT), and the results were compared with the mechanical response and deformation behavior determined by a real-time in-situ neutron diffraction. The simulations well predict the hysteresis loops and cyclic-hardening responses throughout the whole fatigue life (80 cycles), along with the evolution of the maximum twin volume fraction and residual twins. For the first time, the evolution of lattice strain throughout the whole fatigue life was calculated, and the results are in good accordance with that determined by neutron diffraction. The present study strongly demonstrates that the EVPSC-TDT model is very effective for modeling the low-cycle fatigue behavior of Mg alloys. More details about the evolution of the maximum twin volume fraction with fatigue cycles are found, an increase from 1st to 2nd cycle, followed by a decrease from 2nd to 20th cycle and a secondary increase after 20th cycle. This finding corrects the previous opinion that the maximum twin volume fraction increases at the initial stage and tends to be saturated at the late stage. Combining the results of simulations and neutron diffractions, the corresponding reasons are explained. Afterward, the mechanisms of the cyclic-hardening behavior at tension stage and compression stage are revisited, and some new insights are provided.

Numerical simulations of ductile crack initiation and growth in a textured magnesium alloy

Three dimensional effects on mode I notch tip fields in a textured Magnesium alloy

Stress-Based Model for Calculating the Opening Angle of Notch Cracks in a Magnesium Alloy under Multiaxial Fatigue

Stress-state dependency of ductile fracture in an extruded magnesium alloy and its underlying mechanisms

Comparison on crack propagation under tension at 150 °C of Mg-2Zn-1.5Mn alloy sheets with and without crack notch

Investigations of micro-notch effect on small fatigue crack initiation behaviour in nickel-based alloy GH4169: Experiments and simulations

Quantitative analysis of the deformation modes and cracking modes during low-cycle fatigue of a rolled AZ31B magnesium alloy: The influence of texture

Modeling of fatigue crack growth from a notch

Effect of basal texture on small crack behavior of magnesium alloy in very high cycle fatigue regime

Crack Interaction with Nanoscale Twinning Near a Second-Phase Particle in Fine-Grained Magnesium Alloy

Three-dimensional Quantitative in Situ Study of Crack Initiation and Propagation in AA 6061 Aluminum Alloy Sheets Via Synchrotron Laminography and Finite-Element Simulations

Plasticity and ductile fracture modeling of an Al–Si–Mg die-cast alloy

Crystal plasticity modeling of low-cycle fatigue behavior of an Mg-3Al-1Zn alloy based on a model, including twinning and detwinning mechanisms

A coupled kinetic-constitutive approach to the study of high temperature crack initiation in single crystal nickel-base superalloys

4731 - PREDICTION OF CRACK INITIATION IN SINGLE CRYSTAL Ni-BASE SUPERALLOYS AT HIGH TEMPERATURES

A Multiscale Micromechanics Approach to Describe Environmental Effects on Surface Crack Initiation under Cyclic Loading

Failure through crack propagation in components with holes and notches: An experimental assessment of the phase field model

Mode I crack tip fields in amorphous materials with application to metallic glasses

Quantitative assessment of the microstructural factors controlling the fatigue crack initiation mechanisms in AZ31 Mg alloy

Fracture mechanics approach to fatigue crack initiation at uniaxially loaded notches

Self-Consistent Crystal Plasticity Modeling of Slip-Twin Interactions in Mg Alloys