Abstract:Flexoelectric material under certain inhomogeneous electric field can be utilized to control the vibration of flexible structure based on the converse flexoelectric effect. The atomic force microscope (AFM) probe placed on the top of flexoelectric patch and the electrode under it with certain voltage applied between them are used to generate the inhomogeneous electric field. The actuation membrane force and bending moment induced by flexoelectric patch in turn influence the vibration of shells. In this study, an elastic cantilever beam excited by an initial static mechanical force locating at the tip end is considered. As the mechanical force withdraws the snapback response appears where the cantilever beam vibrates with all mode participating and their amplitudes decaying exponentially. Multiple actuators, consist of AFM probes and flexoelectric patches, are used here to accelerate the decrease of snapback response. On each probe voltages of multiple frequencies are applied to obtain the control effects on multiple modes. The actuator’s positions minimizing the tip displacement of the beam is selected as the optimal ones. Two way of determining the control voltage, i.e., open loop and close loop, is introduced and the information of positions of the actuators are emphasized in both methods. In case studies, the free damping vibration of the beam without control is evaluated and the first mode dominates the vibration. The open loop method, with constant amplitude of control voltage, doesn’t work well in a relatively long time scale. While the close loop method, with its control voltage related to the tip displacement detected by a sensor, turns out to be more stable and effective. The optimal positions for the actuations of both methods are clustered near the fixed end, where the actuation factor reaches its maximal value. At last, limitation on voltage amplitude is implemented to avoid the stress concentration, under which the control effect does not weaken much. This study serves as an introduction to flexoelectric material & multiple AFM probe based vibration control and a theoretical foundation for further researches.

Active control of bending wave propagation at acoustic frequencies

Simulation and Experimental Demonstration of Sound Field Control Using Beam Deflection

A Method of Sound Field Control Using Beam Deflection

Active Control on Coupled Bending-Torsion Vibration of Two-Link Space Flexible Component

Multiflexoelectric Actuation and Control of Beams

Dynamic Flexoelectric Actuation and Vibration Control of Beams

Design and testing of a hybrid polymeric electrostrictive/piezoelectric beam with bang–bang control

Control of Beam’s Snapback Responses Using Multiple Flexoelectric Actuators

Dynamics and Active Control of Largely Deflected Active Structures Using the Finite Element Technique

Shape and Displacement Control of Beams With Various Boundary Conditions Via Photostrictive Optical Actuators

Active control of dynamic response of an adaptive beam: Modeling and experiments

Active Control of Nonlinear Piezoelectric Circular Shallow Spherical Shells

Nonlinear Control of Hybrid Electrostrictive/Piezoelectric Polymeric Structures: Theory and Experiment

Flexoelectric Control of Beams with Atomic Force Microscope Probe Excitation

Wavelet Control Model of Suppressing Vibration of Beam-Plates with Piezoelectric Sensors and Actuators

ANALYSIS OF NON-LINEAR PIEZOTHERMOELASTIC LAMINATED BEAMS WITH ELECTRIC AND TEMPERATURE EFFECTS

Static Nano-Control Of Cantilever Beams Using The Inverse Flexoelectric Effect

Pole-Placement Vibration Control of a Flexible Composite I-beam using Piezoceramic Sensors and Actuators

Creating bandgaps in active piezoelectric slender beams through positive position feedback control

Active vibration control of a flexible beam based on experimental modal analysis

Study on Active Control of Sound Radiation From a Baffle in Sonar Equipment