Abstract:In this work, we substantiate and develop a general pyroelectrometallurgical technology for processing bismuth dross and oxides (the intermediate products of lead bullion refining by the Betterton-Kroll process) to obtain crude bismuth. The research focuses on bismuth dross (3–5% Bi; 80–85% Pb) remelted at 500–600°С in the presence of NaNO3 and NaOH, as well as the obtained alkaline melt (bismuth oxides, 1–5% Bi; 60–70% Pb). The conducted experiments allowed us to determine optimal parameters of the main steps of processing bismuth oxide, as well as the characteristics of obtained products. Reduction smelting of bismuth oxides at 1150°C (with the addition of sodium carbonate, quartz and fine coke in the amount of 66, 25 and 5% of bismuth oxides mass, respectively) is proposed, leading to bismuth lead formation. Its decoppering is carried out at 350–600°C with 2.0% sulfur (by its weight), added to the melt. We propose to carry out the alkaline treatment of the decoppered Pb-Bi alloy at 500oC in contact with sodium hydroxide, sodium nitrate and sodium chloride, taken in amounts up to 10.2, 8.3 and 1.4% by weight of bismuth lead, respectively. Subsequent electrolysis comprises electrolytic processing of purified Pb-Bi alloy ingots at 550oC. The electrolyte consists of a melt with the following composition, %: NaCl – 7, KCl – 35, PbCl 2 – 18 and ZnCl 2 – 40. As a result, two end products were obtained by the proposed bismuth oxide processing. The anodic product at the second stage of electrolysis, crude bismuth (yielded 1.1% by the weight of oxides) contains 93.62% Bi and 4.14% Pb, extraction from oxides amounts to 19.0% Bi and 0.1% Pb. About 1.2% Bi and 9.1% Pb of their initial content in the oxides are transferred to the cathodic product containing 0.033% Bi and 97.83% Pb (the yield equalled 5.1% of the oxides).

Hydrolytic method for processing bismuth to obtain compounds

Processing Metallic Bismuth to Produce Citrate

Synthesis of High-Purity Basic Bismuth(III) Succinate as a Pharmaceutical Substance

Preparation of metallic bismuth by reduction of bismuth formates in ethylene glycol medium

Pyroelectrometallurgical processing of bismuth-containing oxides

Reaction of bismuth nitrate with sodium citrate in water-glycerol solutions

Bismuth as a Reactive Solvent in the Synthesis of Multicomponent Transition-Metal-Bearing Bismuthides

Controlled hydrothermal synthesis of bismuth oxyhalide nanobelts and nanotubes.

Hydrothermal preparation and characterization of rod-like ultrafine powders of bismuth sulfide

Preparation of Potassium Borohydride by a Mechano‐Chemical Reaction of Saline Hydrides with Dehydrated Borate Through Ball Milling.

Removal of impurities from bismuth pickling solution using solvent extraction with TBP

Hydrometallurgical process for extracting bismuth from by-product of lead smelting based on methanesulfonic acid system

Electrochemical Production of Bismuth in the KCl-PbCl2 Melt

Bi4Ti3O12 nanocrystals synthesized via hydrothermal reaction

Synthesis of new Bismuth (III) compound and adducts of benzothiazol disulfide derivatives and their complexes with Co(II), Ni(II) and Cu(II)

Synthesis and Characterization of Bismuth Single-Crystalline Nanowires and Nanospheres

Hydrothermal synthesis and photocatalytic properties of bismuth molybdate materials

Freeze-drying process for the design of porous formulations based on bismuth-potassium-ammonium citrate

Bi2(C2O4)3·7H2O and Bi(C2O4)OH Oxalates Thermal Decomposition Revisited. Formation of Nanoparticles with a Lower Melting Point than Bulk Bismuth

Bismuth–iron-based precursor: preparation, phase composition, and two methods of thermal treatment

Solvent Thermal Synthesis and Characterization of Ultrafine Powder of Bismuth Sulfide