Abstract:Solid-state batteries (SSBs) can offer a paradigm shift in battery safety and energy density. Yet, the promise hinges on the ability to integrate high-performance electrodes with state-of-the-art solid electrolytes. For example, lithium (Li) metal, the most energy-dense anode candidate suffers from severe interfacial chemomechanical issues that lead to cell failure. Li alloys of In/Sn are attractive alternatives, but their exploration has mostly been limited to the low capacity (low Li content) and In-rich LixIn (x ≤ 0.5) systems. Here, the fundamental electro-chemo-mechanical behavior of Li–In and Li–Sn alloys of varied Li stoichiometries is unraveled in sulfide electrolyte-based SSBs. The intermetallic electrodes developed through a controlled synthesis and fabrication technique display impressive (electro)chemical stability with Li6PS5Cl as the solid electrolyte and maintain nearly perfect interfacial contact during the electrochemical Li insertion/deinsertion under an optimal stack pressure. Their intriguing variation in the Li migration barrier with composition and its influence on the observed Li cycling overpotential is revealed through combined computational and electrochemical studies. Stable interfacial chemomechanics of the alloys allow long-term dendrite free Li cycling (>1000 h) at relatively high current densities (1 mA cm–2) and capacities (1 mAh cm–2), as demonstrated for Li13In3 and Li17Sn4, which are more desirable from a capacity and cost consideration compared to the low-Li-content analogues. The presented understanding can guide the development of high-capacity Li–In/Sn alloy anodes for SSBs.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.chemmater.1c01431.Additional experimental details; diffraction pattern of the Li–In and Li–Sn alloys; SEM micrographs of the alloys and the fabricated electrodes; resistance of the SE pellets; stack resistance of A|Li6PS5Cl|A (A = Li, In, Li0.5In, LiIn, Li13In3 Li2Sn5, or Li17Sn4) cells; stripping and plating performance of metallic lithium and long-term stripping and plating performance of cells assembled with Li0.5In and LiIn; computational details; a list of the compound studied with modeling, their provenance, and the definition of the formation energy; and the additional Li migration barriers in selected alloys (PDF)This article has not yet been cited by other publications.

Realizing long-cycling all-solid-state Li-In||TiS2 batteries using Li6+xMxAs1-xS5I (M=Si, Sn) sulfide solid electrolytes

A Dynamically Stable Sulfide Electrolyte Architecture for High-Performance All-Solid-State Lithium Metal Batteries

Achieving high-performance Li6.5Sb0.5Ge0.5S5I-based all-solid-state lithium batteries

In Situ Formed LiI Interfacial Layer for All-Solid-State Lithium Batteries with Li6PS5Cl Solid Electrolyte Membranes.

Sulfide Based Solid Electrolyte for Lithium-Sulfur Batteries

Majorizing Structural Design and Unraveling Synergistic Mechanisms in Sulfide Electrolytes Via Cationic and Anionic Modulation

Integrating Lithium Sulfide as a Single Ionic Conductor Interphase for Stable All-Solid-State Lithium-Sulfur Batteries

Bulk and interface-strengthened Li7P2.9Sb0.1S10.65O0.15I0.2 electrolyte via dual-source doping for all-solid-state lithium-sulfur batteries

A Versatile Li<sub>6.5</sub>In<sub>0.25</sub>P<sub>0.75</sub>S<sub>5</sub>I Sulfide Electrolyte Triggered by Ultimate-Energy Mechanical Alloying for All-Solid-State Lithium Metal Batteries

Stabilizing Li4SnS4 Electrolyte from Interface to Bulk Phase with a Gradient Lithium Iodide/Polymer Layer in Lithium Metal Batteries

Super Long‐Cycling All‐Solid‐State Battery with Thin Li6PS5Cl‐Based Electrolyte

Solid‐State Lithium Metal Batteries with Extended Cycling Enabled by Dynamic Adaptive Solid‐State Interfaces

A Versatile InF3 Substituted Argyrodite Sulfide Electrolyte Toward Ultrathin Films for All‐Solid‐State Lithium Batteries

Favorable Interfacial Chemomechanics Enables Stable Cycling of High Li-Content Li-In/Sn Anodes in Sulfide Electrolyte Based Solid-State Batteries

Super Long‐Cycling All‐Solid‐State Battery with Thin Li <sub>6</sub> PS <sub>5</sub> Cl‐Based Electrolyte

Silicon-Doped Argyrodite Solid Electrolyte Li 6 PS 5 I with Improved Ionic Conductivity and Interfacial Compatibility for High-Performance All-Solid-State Lithium Batteries

Favorable Interfacial Chemomechanics Enables Stable Cycling of High-Li-Content Li–In/Sn Anodes in Sulfide Electrolyte-Based Solid-State Batteries

Boosting the Electrochemical Performance of All‐Solid‐State Batteries with Sulfide Li6PS5Cl Solid Electrolyte Using Li2WO4‐Coated LiCoO2 Cathode

Tailored Li 7 P 3 S 11 Electrolyte by In 2 S 3 Doping Suppresses Electrochemical Decomposition for High-Performance All-Solid-State Lithium–Sulfur Batteries

Unveiling the Growth Mechanism of the Interphase between Lithium Metal and Li2S‐P2S5‐B2S3 Solid‐State Electrolytes

Enhanced Air and Electrochemical Stability of Li 7 P 3 S 11 –Based Solid Electrolytes Enabled by Aliovalent Substitution of SnO 2